Претраживање
Приказ резултата 41-50 од 53
Synthesis and characterization of AgPd alloy coatings as beneficial catalysts for low temperature fuel cells application
(Elsevier, 2019)
The Ag, Pd and AgPd alloys of different morphologies and compositions were electrodeposited onto Au
and glassy carbon (GC) disc electrodes from the solution containing 0.001 M PdCl2 þ 0.04 M AgCl þ 0.1 M
HCl þ 12 M LiCl ...
Electrochemical Activity of Thin-Film Pd Catalysts Modified with Bi for Methanol and Ethanol Oxidation Reaction in Alkaline Solution
(ESG, 2020)
Thin-film Pd catalysts with low metal loadings (55 and 110 µg cm-2) were obtained by electrodeposition from a surfactant-free green electrolyte on glassy carbon (GC) electrode. Pd/GC catalysts were modified by addition of ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Formation of two-dimensional (2D) lead dendrites by application of different regimes of electrolysis
(Springer, New York, 2012)
Electrodeposition of lead from nitrate electrolyte in constant regimes of electrolysis was analyzed and the obtained powder lead deposits were examined by scanning electron microscopy. Polarization curve for lead ...
Electrodeposition of iron powder particles of different characteristics
(Serbian Chemical Society, Belgrade, 2010)
Iron deposits obtained at high current densities and overpotentials are very important from a technological point of view. It has been stated that the open and porous structures of copper or iron deposits obtained at high ...
Structural, Mechanical and Electrical Characteristics of Copper Coatings Obtained by Various Electrodeposition Processes
(MDPI, 2022)
Mechanical (hardness and adhesion) and electrical (sheet resistance) characteristics of electrolytically produced copper coatings have been investigated. Morphologies of Cu coatings produced galvanostatically at two current ...
Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition
(Elsevier, 2007)
Copper electrodeposition from acid sulfate solutions at an overpotential of 1000 mV, which is about 250 mV outside the plateau of the limiting diffusion current density, was examined by the determination of the average ...
Ballistic magnetoresistance versus magnetostriction effects in electrodeposited nanocontacts at room temperature
(Institute of Electrical and Electronics Engineers, Inc., 2003)
The authors present experiments and discuss recent results on ballistic magnetotesistance in nanometer size (on the order of 1 to 10 nm) nanocontacts grown by electrodeposition in
thin wires and in thin films of a few ...
Electrochemical Investigation of Lateritic Ore Leaching Solutions for Ni and Co Ions Extraction
(Switzerland : Multidisciplinary Digital Publishing Institute (MDPI), 2022)
Determination of the extractive behavior of ionic species from lateritic ore leachates is complex, since the leachates are pregnant with tens of different ions in, as a rule, multiple oxide states. To examine the possible ...