Претраживање
Приказ резултата 31-40 од 53
Aluminium electrodeposition under novel conditions from AlCl3–urea deep eutectic solvent at room temperature
(Elsevier, 2020)
The electrodeposition of aluminium on glassy carbon and aluminium substrates from AlCl3–urea deep eutectic solvent (DES) system at near room temperatures was investigated, without additional purification of the chemicals ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range
(Springer, New York, 2012)
The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
Structural characteristics of bright copper surfaces
(Journal of Electroanalytical Chemistry, 2001)
In this work, the structures of copper surfaces polished mechanically and polished both mechanically and electrochemically, as well as copper coatings obtained in the presence of basic and top brightening addition agents ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to
3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Protective properties of cataphoretic epoxy coating on aluminium alloy AA6060 modified with electrodeposited Ce-based coatings: Effect of post-treatment
(Elsevier Science Sa, Lausanne, 2015)
Ce-based conversion coatings (CeCCs) are a promising alternative to toxic chromate coatings on the metal substrates. In this work the CeCCs were electrodeposited on aluminium alloy AA6060 from aqueous solution of Ce(NO3)(3) ...
Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime
(Elsevier, 2011)
In this study, the effect of the anodic current density in the regime of reversing current (RC) on the quantity of evolved hydrogen and morphology of copper deposits was considered. The quantity of evolved hydrogen was ...
Nanoscale pattern formation during electrodeposition: Ru on reconstructed au(111)
(USA : American Physical Society, 1999)
Scanning tunneling microscopy results on Ru electrodeposition on reconstructed Au(111) are presented, which show a novel type of site-selective nucleation on this surface. At potentials around 0.0 V vs the Ag/AgCl reference ...