Pretraživanje
Prikaz rezultata 31-40 od 81
Biofilm forming microorganisms on various substrata from greenhouse of Botanical Garden “Jevremovac” / Mikroorganizmi u sastavu biofilma s različitih supstrata staklenika Botaničke bašte “Jevremovac”
(Novi Sad : Matica srpska, 2017)
Diversity of subaerial biofilm forming cyanobacteria, algae and fungi was investigated on 10 different substrata from greenhouse of Botanical Garden “Jevremovac”. Out of 37 documented taxa, 16 cyanobacterial and 10 algal ...
Creating and control of welded joints in IHTM / Primena zavarivanja plazmom i kontrola zavarenog spoja pri izradi transmitera pritiska u IHTM-u
(Savez inženjera i tehničara Srbije, 2011)
IHTM produces pressure transmitters, temperature transmitters, level transmitters and transmitters of differences pressure. All transmitters consist of measuring chamber, transitional part and electronic boxes. The paper ...
Oscillators: Phenomenological mappings and analogies: Second part: Structural analogy and chains / Oscillateurs: Correspondance phénoménologiques et analogies: Deuxieme partie: Analogie structurale et les chaînes
(Belgrade, Serbia : Military Technical Institute, 2015)
New analytical and numerical results of dynamics for both linear and nonlinear system with two degrees of freedom are presented. For the mechanical chain system with two degrees of freedom, oscillations are investigated ...
Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition
(Metalurgija, 2011)
Magnetic thin films based on iron group elements (Fe, Co, Ni) are currently used in computer's hard disk drives and in MEMS, whereas electrodeposition is a suitable method to obtain these materials. The powders of metals ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Synergetic effect of additives on the hardness and adhesion of thin electrodeposited copper films
(Faculty of Technical Sciences in Cacak, 2017)
Thin copper films were electrodeposited on a polycrystalline cold-rolled copper substrate. The composition of the laboratory-made copper sulphate electrolyte was changed by the addition of various additives. The influence ...
Gap analysis and risk occurrence on the example of pressure transmitter`s production processes
(Belgrade : Institute for research and design in industry, 2019)
Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto ...
Micromechanical properties of composite systems consisting of electrodeposited nickel coatings on different substrates / Mikromehanička svojstva kompozitnih sistema formiranih elektrohemijskim taloženjem filmova nikla i bakra na različitim podlogama
(Savez inženjera i tehničara Srbije, 2012)
Fine-grained nickel and copper thin films were electrodeposited (ED) from self-made sulphamate and sulphate electrolytes, respectively, on different substrates. The substrates were single crystal silicon with two different ...
Properties of adsorbent obtained by conventional and under microwave irradiation / Svojstva adsorbensa dobijenog aktivacijom bentonita na konvencionalan način i u mikrotalasnom polju
(Savez inženjera i tehničara Srbije, 2012)
In this paper the effect of acid activation by conventional and under microwave irradiation on the textural and structural properties of bentonite was studied. The adsorbents were characterized by powder X-ray diffraction ...
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Vojnotehnički institut, Beograd, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...