Претраживање
Приказ резултата 21-30 од 210
Microfabrication by Mask-maskless wet Anisotropic Etching for Realization of Multilevel Structures in {100} Oriented Si
(Institute of Electrical and Electronics Engineers Inc., 2012)
Step-like structures oriented along LT 110 > or LT 110 > directions on {100} oriented Si substrates are first etched with mask following maskless etching in 30 wt. % KOH solution in water at 80 degrees C. The step ...
Modelling of temperature distribution in thermal microsensors on sandwich thermally isolated structures
(13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microele, 2012)
The paper presents a modelling of temperature distribution in the sandwich thermally isolated structures used in thermal microsensors. The two cases are considered: 1) the temperature distribution along the thickness of a ...
Modeling of the Conductivity Alteration in the Gold Thin Film-Based Mercury Sensor Using the Fuchs Theory
(Institute of Electrical and Electronics Engineers Inc., 2012)
We report on the development and testing of the metallic mercury sensor. Sensor is based on the gold thin film layer where sensing is achieved by formation of the gold-mercury amalgam. Complete technological procedure and ...
Teaching optics: Preuniversity level
(19th Telecommunications Forum, TELFOR 2011 - Proceedings of Papers, 2011)
This paper presents the expirience of introducing the Optics Suitcase, a portable kit for demonstrating optics to students, developed at the Institute of Optics in Rochester, to high school children following experimental ...
Analytical modelling of transient processes in thermal microsensors
(12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microele, 2011)
An analytical method is developed to determine the frequency response of thermal microsensors on various input actions. The method has the following algorithm. In a microsensor, the domain of modelling is marked out. This ...
Synthesis and characterization of octenyl succinic anhydride modified levan
(10th European Symposium on Biopolymers, Straubing, Germany, September 25-27, 2019, Program Abstracts, 2019)
The aim of the present study is to optimize the synthesis of OSA-levan derivative.
Adsorption-desorption phase noise in RF MEMS/NEMS resonators
(10th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting, 2011)
In this paper the analysis is presented of the dependence of adsorption-desorption phase noise in MEMS/NEMS resonators of their resonant frequency, operating pressure and temperature. Results of the analysis are useful for ...
Micromachining by maskless wet anisotropic etching {hkl} structures on {100} oriented silicon
(27th International Conference on Microelectronics, MIEL 2010 - Proceedings, 2010)
The paper presents investigation of micromechanical technique using 3D anisotropically etched Si structures. Ridge-like structure oriented along LT 110> direction is first etched with mask following maskless etching in ...
Biodegradation of selected PCBs by microorganisms isolated from PCBs polluted environment
(Japan : Kyoto University, 2019)
During the XX century, mankind had developed various substances with excellent chemical and physical
properties, and they were used as pesticides, flame retardants, oil for transformers and capacitors, water repellent
...
Preparation and Characterization of Al2O3 Thin Films for Catalytic Activity Studies
(Nanostructured Materials, Thin Films and Hard Coatings For Advanced Applications, 2010)
In the present work, the surface properties of various Al oxide films were investigated. The oxide films were produced on a stainless steel by spray pyrolysis and cathodic deposition methods. The films obtained represent ...