Претраживање
Приказ резултата 1-10 од 26
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used
method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Hardness and morphology analysis of electrolytically produced copper coatings / Analiza tvrdoće i morfologije elektrolitički dobijenih bakarnih prevlaka
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
The influence of various electrolysis parameters, such as selected operating current regime, the
cathode material type, composition and mixing conditions of the electrolyte and electrodeposition
time, on the ...
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Electrochemical investigation of lateritic ore leachates for metal ions extraction
(Belgrade : Serbian Society of Corrosion and Materials Protection UISKOZAM, 2021)
Electrochemical measurements were employed to study the possibility of the extraction of metal ions from lateritic ore leachates predominantly rich in Fe in order to separate more noble cobalt and nickel metals. Lateritic ...
Optimization of electrodeposition parameters to improve composite hardness of nickel coatings on brass substrate for varying film thicknesses and applied indentation loads
(Belgrade : ETRAN Society, 2022)
In this investigation, nickel coatings were electrodeposited on brass substrate. The effects of
electrodeposition process parameters such as, current density and deposition time (coatings thickness), on surface morphology ...
Morphological and Structural Characterization of Tin Dendritic Nanostructures Produced by Various Electrodeposition Processes
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
In this study, Sn powders were electrodeposited from an alkaline electrolyte containing 20 g/l SnCl2 × 2H2O in 250 g/l NaOH at the room temperature by application of both potentiostatic and
galvanostatic regimes of the ...
Formiranje Nb taloga na staklastom ugljeniku iz hloroaluminatnog rastopa / Formation of Nb deposit on vitrius carbon from chloroaluminate melts
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2016)
Ispitivano je elektrohemijsko taloženje i rastvaranje niobijuma iz rastopa ekvimolarne smeše
aluminijum (III) hlorida i natrijum hlorida, obogaćenog niobijumom, na staklastom ugljeniku.
Elektrotaloženje je izvođeno u ...
Electrochemical deposition of titanium and aluminium from equimolar AlCl3+NaCl melt
(Romanian Chemical Society, 2019)
Electrodeposition of Al-Ti based materials is an attractive process offering
many advantages over more conventional processing methods. A number of articles on
aluminium-titanium intermetallics electrodeposited from ...