Претраживање
Приказ резултата 1-10 од 18
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Hardness and morphology analysis of electrolytically produced copper coatings / Analiza tvrdoće i morfologije elektrolitički dobijenih bakarnih prevlaka
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
The influence of various electrolysis parameters, such as selected operating current regime, the
cathode material type, composition and mixing conditions of the electrolyte and electrodeposition
time, on the ...
Electrochemical investigation of lateritic ore leachates for metal ions extraction
(Belgrade : Serbian Society of Corrosion and Materials Protection UISKOZAM, 2021)
Electrochemical measurements were employed to study the possibility of the extraction of metal ions from lateritic ore leachates predominantly rich in Fe in order to separate more noble cobalt and nickel metals. Lateritic ...
Nucleation and growth of tin dendrites from alkaline electrolyte / Nukleacija i rast dendrita kalaja iz alkalnog elektrolita
(Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2023)
Procesi nukleacije i rasta dendrita kalaja iz alkalnog hidroksidnog elektrolita su istraženi hronoamperometrijom i skenirajućom elektronskom mikroskopskom (SEM) analizom taloga potenciostatski elektrohemijski istaloženih ...
Morphology of aluminium electrodeposited on aluminium from AlCl3+urea solvate ionic liquid
(Society of Physical Chemists of Serbia, 2021)
The ionic liquid, made of urea and AlCl3, known as deep eutectic solvent (DESs) has already shown to be low‐cost electrolyte suitable for aluminum electrodeposition. By applying appropriate potentiostatic or galvanostatic ...
Towards sustainable rare earth elements recovery
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2023)
Our contribution, made in joint research efforts of ICTM Institute, University of Belgrade
with IME Institute, Aachen University, to the molten salt electrolysis within the field of recycling
rare earth metals from ...
Influence of parameters of the pulsating current (PC) regime on morphological, structural and hardness characteristics of copper coatings electrodeposited on Si(111)
(Niš, Serbia : RAD Centre, 2021)
Electrodeposition of Cu was performed on Si(111) by the pulsating current (PC) regime in the
range of the average current densities (jav) between 15 and 70 mA cm-2
. The selected values of the
average current densities ...
Enhancement of ethanol oxidation on Pd electrodeposited over Sb2O3 / Poboljšanje oksidacije etanola na Pd elektrohemijski nataloženom preko Sb2O3
(Srpsko hemijsko društvo, 2023)
Electrodeposited Pd and Sb-Pd catalysts were tested for the ethanol oxidation reaction by cyclic voltammetry and chronoamperometry. Palladium-antimony deposit was synthesized on a glassy carbon substrate by a two-step ...