Претраживање
Приказ резултата 1-10 од 265
Degradation of azithromycin using Ti/RuO2 anode as catalyst followed by DPV, HPLC-UV and MS analysis
(Versita, Warsaw, 2017)
The electrodegradation of azithromycin was studied by its indirect oxidation using dimensionally stable Ti/RuO2 anode as catalyst in the electrolyte containing methanol, 0.05 M NaHCO3, sodium chloride and deionized water. ...
Evaluation of heavy metal contamination in sediments using the method of total digestion and determination of the binding forms-Tisa River Basin, Serbia
(Taylor and Francis Inc., 2010)
This paper describes an approach for the evaluation of metal contamination in sediment, using the determination of binding forms of elements (sequential extraction method), the total element content (digestion method), as ...
Structural effects in electrocatalysis: Formic acid oxidation at model and real Pt catalysts
(Materials Science Forum, 2006)
Formic acid oxidation was studied at low-index Pt single crystals (model systems) as well as at the platinum catalyst supported on high area carbon (real catalyst) in HClO4. The Pt single crystals were characterized by ...
Introduction of Pt and Pd Nanoclusters in Zeolite Cavities by Thermal Degradation of Acetylacetonates
(Trans Tech Publications, Switzerland, 2004)
Nanodispersed metallic clusters of platinum and palladium were incorporated into NaX
zeolite cavities by impregnation with acetone solution of corresponding acetylacetonates, solvent
evaporation and acetylacetonate ...
Evaluation of genotoxic potential of avarol, avarone, and its methoxy and methylamino derivatives in prokaryotic and eukaryotic test models
(Taylor and Francis Ltd, 2017)
In this study, mutagenic and genotoxic potential of anti-tumor compounds avarol, avarone, and its derivatives 3′-methoxyavarone, 4′-(methylamino)avarone and 3′-(methylamino)avarone was evaluated and compared to cytostatics ...
A Voltammetric Method for the Quantitative Determination of Midecamycin Compared to Its Simultaneous HPLC Determination
(Maik Nauka/Interperiodica/Springer, New York, 2011)
The aim of this study was to present the quantitative determination of midecamycin at a gold electrode in 0.05 M NaHCO(3) using cyclic linear sweep voltammetry. It was found that the value of the oxidative peak of pure ...
Electrochemical Oxidation of Methanol and Ethanol on Electrodeposited Pd and PdNi-Coated Electrodes
(Pleiades Publishing Inc, Moscow, 2017)
Electrodeposited PdNi and Pd samples were tested for methanol and ethanol oxidation reaction (MOR and EOR) in alkaline solution using cyclic voltammetry (CV) and chronoamperometric (CA) measurements. Among the CVs for the ...
Impact of carboxymethylcellulose on morphology and antibiotic production by Streptomyces hygroscopicus
(Current Microbiology, 2008)
A chemically defined media consisting of carboxymethylcellulose (CMC) was developed to maximize the production of antibiotics, hexaene H-85 and azalomycine, by Streptomyces hygroscopicus CH-7. The production of antibiotics ...
Porous glycidyl methacrylate-bentonite composite
(Maik Nauka/Interperiodica/Springer, New York, 2011)
Crosslinked macroporous copolymer of glycidyl methacrylate and ethylene glycol dimethacrylate (CP) and copolymer composite with acid modified clay (CP-S-A) were prepared by radical suspension copolymerization and functionalized ...
Characterization of copper powder particles obtained by electrodeposition as function of different current densities
(Journal of Applied Electrochemistry, 2009)
Technological properties of powders depend on their granulometry and morphology. Very often one method is inadequate for characterization of powder particles. This article studied different methods intended for clear ...