Претраживање
Приказ резултата 11-20 од 913
CO2 conversion enhancement in a periodically operated Sabatier reactor: Nonlinear frequency response analysis and simulation- based Study
(The 25th International Symposium of Chemical Reaction Engineering (ISCRE 25), Florance, Italy, 2018)
Nonlinear frequency response (NFR) analysis was applied on a Sabatier reactor. A substantial improvement in CO2 conversion was predicted under certain conditions. The NFR analysis prediction was validated using a kinetic ...
AC Impedance tracking of glassy carbon activation
(Serbian Chemical Society, Belgrade, 2010)
Carbon materials, due to their physical and chemical properties, have found wide application in different electrochemical systems. They are often used as substrates for supercapacitors and different types of electrocatalysts. ...
Channel selector for optimization of test and callibration procedures of ICTM pressure sensors
(Belgrade : Military Technical Institute, 2016)
This paper presents channel selector developed for improvement of the efficiency of the test and callibration
procedure of ICTM pressure sensors. So far, this procedure allowed testing of only one sensor at the time. The ...
Antioxidant and antimicrobial potentials of champignon mushroom
(CEFood 2012 - Proceedings of 6th Central European Congress on Food, 2012)
Fruiting bodies of some wild and cultivatable mushrooms contain medicinal compounds which are being used in traditional medicines and cosmetics. Champignon mushroom (Agaricus bisporus) is the most widely cultivated species ...
Redshifting Approach for Nanoplasmonic Enhancement of Semiconductor Infrared Detectors
(Institute of Electrical and Electronics Engineers Inc., 2012)
In this work we consider the enhancement of ultimate performance of semiconductor infrared detectors utilizing nanoplasmonics. To this purpose we analyze the application of transparent conductive oxides (TCO) as plasmonic ...
A consideration of the use of ICTM SP-12 pressure sensor for ultrasound sensing
(Belgrade : ETRAN SocietyBelgrade : Akademska misao, 2019)
A consideration study for the application of the pressure sensor SP-12 developed and produced by ICTM CMT as an ultrasound sensor is given. The interaction of ultrasound with the sensor’s membrane was analytically described, ...
Microfabrication by Mask-maskless wet Anisotropic Etching for Realization of Multilevel Structures in {100} Oriented Si
(Institute of Electrical and Electronics Engineers Inc., 2012)
Step-like structures oriented along LT 110 > or LT 110 > directions on {100} oriented Si substrates are first etched with mask following maskless etching in 30 wt. % KOH solution in water at 80 degrees C. The step ...
Supercritical fluids as green solvents
(University of Belgrade, Technical Faculty in Bor, 2019)
Supercritical fluids(SCFs) offer the possibility for obtaining and designing of new environmentally friendly and sustainable products with special characteristics. Recently, SCFs have been applied for polymer processing,polymer ...
Characterization of nickel thin multilayer films electrodeposited under different agitation conditions
(Belgrade : Military Technical Institute, 2018)
Alternate electrodeposition of ordinary and ultrasonic-assisted Ni layers on polycrystalline copper substrates and single-crystal (100)-oriented silicon wafers was used for the formation of composite systems with nickel ...
Modelling of temperature distribution in thermal microsensors on sandwich thermally isolated structures
(13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microele, 2012)
The paper presents a modelling of temperature distribution in the sandwich thermally isolated structures used in thermal microsensors. The two cases are considered: 1) the temperature distribution along the thickness of a ...