Search
Now showing items 41-50 of 81
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used
method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Al-Pd alloy formation by aluminium underpotential deposition onto palladium from chloroaluminate melt
(Belgrade : ESG, 2021)
The possibility of electrochemical underpotential deposition of aluminium onto palladium from equimolar AlCl3+NaCl melts at temperatures between 200 ° and 300 °C was investigated. Electrochemical techniques used were cyclic ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Hydrogen evolution on Ni/WC composite coatings
(Springer, 2006)
The catalytic activity for the hydrogen evolution reaction (HER) of Ni/WC composites obtained by electrochemical
deposition of nickel from a conventional Watt’s bath, using two different ways of depositing the WC particles, ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni þ WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)
from a commercially available Watts bath containing additives for brightness and smoothing and insoluble ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures
(Elsevier, 2018)
Silver dendritic nanonstructures obtained by the potentiostatic electrolysis from different electrolytes at different overpotentials were characterized by the scanning electron microscopy (SEM) technique and X-ray diffraction ...
Influence of electrodeposition regime and Sn:Pd ratios in Sn-Pd electrocatalysts on ethanol oxidation reaction / Влијание на режимот на електродепозицијата и на односите на Sn:Pd во Sn-Pd-електрокатализаторите врз оксидацијата на етанолот
(Society of Chemists and Technologists of MacedoniaSs. Cyril and Methodius University in Skopje, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...