Претраживање
Приказ резултата 71-80 од 81
Preparation and mechanical characterization of copper thin films with additives on alloy substrates
(Belgrade : Institute of Chemistry, Technology and Metallurgy, 2017)
Thin copper films have various application in the electronic industry for the fabrication of
contacts in integrated circuits. Copper electroplating has been widely employed for
fabricating the wires of printed circuit ...
Impact of deposition conditions on the electrocatalytic performances of Sn-Pd catalysts in ethanol oxidation reaction
(Serbian society of corrosion and materials protection (UISKOZAM) / Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2023)
We are reporting the electrochemical behavior of bimetallic Sn-Pd catalysts in ethanol oxidation reaction (EOR). Sn-Pd catalysts were prepared by two step electrodeposition technique whereby by regulating deposition ...
Phenomena of Nucleation and Growth of Tin Dendrites from the Alkaline Solution
(Serbian society of corrosion and materials protection (UISKOZAM) / Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2023)
The processes of nucleation and growth of tin dendrites from the alkaline hydroxide solution have been investigated. Nucleation of tin was examined by chronoamperometry at the cathodic potentials which belonged to various ...
Identification of intermetallic compounds in electrodeposited copper-cadmium alloys by electrochemical techniques
(Elsevier, 1989)
Anodic sweep voltammetry was used to identify different intermetallic compounds and assess their amount in copper-cadmium alloys. Four compounds are found in thin (1–8 μm) electroplated alloy films: CuCd3, Cu5Cd8, Cu4Cd3 ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Phase-structure analysis of brass by anodic linear-sweep voltammetry
(Springer, 1992)
Anodic linear-sweep voltammetry (ALSV) was applied to electrodeposited alloy layers and to metallurgically obtained Cu−Zn alloys of different composition and structure. Metallurgically obtained samples covered the range ...
Analysis and interpretation of bimetallic plasmonic metamaterial properties for forensic applications
(Belgrade : University of Criminal Investigation and Police Studies, 2023)
Plasmonic biochemical sensors, as a subgroup of optical refractometric sensors, are a topic of rapid research and development due to their ability to detect trace amounts of biochemical agents, ...
Electrochemical formation of magnesium oxide/hydroxide structures / Elektrohemijsko formiranje različitih oblika magnezijum oksida/hidroksida
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2017)
Nanocrystalline magnesium oxides and hydroxides are attracting comprehensive attention due to their high surface area and their specific optical, thermal, electrical and chemical characteristics. Magnesium oxides and ...
Metal Matrix Composite Coatings Based on Ni Matrix and Biosilica Filers Obtained from Rice Husks
(Electron Devices Society of the IInstitute of electrical and electronics engineers, inc., 2023)
Electrochemically deposited nickel coatings from
sulfamate baths without/with lab-made biosilica (SiO2) particles on
the Si(100) substrate were produced. Different galvanostatic
regimes were used: direct current (DC), ...
The comparative XRD and SEM analysis of electrochemically produced silver nanostructures
(Zagreb, Croatia : Ruđer Bošković Institute and Croatian Microscopy Society, 2017)
Electrodeposition technique is very suitable way to obtain nanostructures of the desired shapes and dimensions. It is attained by the choice of regimes and parameters of electrolysis, such as the type and composition of ...