Претраживање
Приказ резултата 11-20 од 81
The effects of a magnetic field on the morphologies of nickel and copper deposits: The concept of 'effective overpotential' / Uticaj primenjenih magnetnih polja na morfologije taloga nikla i bakra - koncept 'efektivne prenapetosti'
(Serbian Chemical Society, 2007)
The morphologies of nickel and copper deposits obtained without applied magnetic fields, and with both parallel and perpendicular applied magnetic fields were examined by the scanning electron microscopy (SEM) technique. ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used
method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot-Lesage composite hardness model / Одређивање апсолутне тврдоће електролитички добијених превлака бакра применом Chicot-Lesage композитног модела тврдоће
(Belgrade : Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot–Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Relationship between the kinetic parameters and morphology of electrochemically deposited lead
(Serbian Chemical Society, 2016)
The processes of lead electrodeposition from electrolytes of various concentrations of sodium nitrate as the supporting electrolyte have been examined by chronoamperometry and by the scanning electron microscopic (SEM) ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Morphology and structure of bright electrodeposited metal coatings
(Soc Chemists Technologists Madeconia, Skopje, 2011)
The properties which determine whether the metal surface is mirror bright are precisely determined by scanning electron microscopy (SEM), atomic forces microscopy (AFM), scanning tunneling microscopy (STM) and reflectance ...
New method of the determination of specific surface of copper obtained by the electrodeposition / Novi metod određivanja specifične površine elektrohemijski istaloženog bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2007)
The specific surface of electrodeposited copper was determined using recently proposed way for the estimation of the real surface area of metal deposits. The obtained values of the specific surface of copper deposits were ...