Pretraživanje
Prikaz rezultata 21-30 od 86
Influence of welding current intensity on susceptibility to intergranular corrosion in welded joints of stainless steel / Uticaj jačine struje zavarivanja na sklonost prema interkristalnoj koroziji zavarenog spoja nerdajućeg čelika
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
Susceptibility to intergranular corrosion in welded joints of austenitic stainless steel X5Cr-Ni18-10 was tested. The welding was performed with different intensity of welding current (110 A, 130 A and 150 A). The tests ...
Hardness and assessment of adhesion of monolayer and multilayer nickel thin films electrochemically deposited on silicon substrates with and without the ultrasonic agitation / Tvrdoća i procena adhezije jednoslojnih i višeslojnih tankih filmova nikla elektrohemijski deponovanih na silicijumskim podlogama sa i bez ultrazvučnog mešanja
(Belgrade : Academy of Criminalistic and Police Studies, 2019)
Composite systems of monolayer and multilayer nickel films electrochemically deposited on single crystal (100)-oriented silicon wafers were fabricated with and without the ultrasonic agitation. The hardness and adhesion ...
Antitumour effect of a mixture of n-propyl polysulfides In vitro / Antitumorski efekti smeše n-propil polisulfida in vitro
(Serbian Journal of Experimental and Clinical Research, 2019)
Copper serves as a limiting factor for multiple steps of tumour progression, including angiogenesis, growth and metastasis. High levels of copper have been found in a wide spectrum of human cancers. Antitumour activities ...
Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I / Veza izmenu korozionog potencijala i različitih vidova korozije metala, legura i njihovih zavarenih spojeva - deo I
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
This paper briefly describes the relationship between corrosion potential and different corrosion forms of metals and their welded joints. The nature of corrosion potential and the method of its measurement is also described. ...
Pitting corrosion testing of stainless steel AISI 304 in chloride solutions / Ispitivanje piting korozije nerđajućeg čelika AISI 304 u rastvorima hlorida
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2015)
Stainless steels and their welded joints are often susceptible to pitting corrosion in solutions containing chloride ions. Testing of pitting corrosion of stainless steels is performed using chemical and electrochemical ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Synergetic effect of additives on the hardness and adhesion of thin electrodeposited copper films
(Faculty of Technical Sciences in Cacak, 2017)
Thin copper films were electrodeposited on a polycrystalline cold-rolled copper substrate. The composition of the laboratory-made copper sulphate electrolyte was changed by the addition of various additives. The influence ...
Examination of phosphate ores bioleaching from Lisina deposit / Ispitivanje mogućnosti bioluženja fosfora iz fosfatne rude sa ležišta Lisina
(Belgrade, Serbia : Engineering Society for Corrosion, 2012)
Phosphorus solubilization from insoluble phosphate ores by acidophilic autotrophs and heterotrophs is a research of significant interest, because of potential use of these ores as fertilizers, which are economically and ...
Modification and use of small dimensions pressure transmitters / Modifikacija i upotreba malogabaritnog transmitera pritiska
(Savez inženjera i tehničara Srbije, 2013)
In this paper was shown modification of small dimensions pressure transmitter. Modification of the transmitter is a model that provides to improve the manufacturing process. Modification of the IHTM transmitters proved to ...
The acceptable strategies for new product development in Serbian small-scale manufacturing enterprises
(Beograd : Institut za istraživanja i projektovanja u privredi, 2016)
The research results relating to the new product development are represented in this paper. The importance of market pull strategy is described too. Market pull strategy is reflected in the enterprise cooperation with ...