Претраживање
Приказ резултата 1-10 од 82
Structures of Ni - Ni Nan contacts obtained by the electrode position in the presence of a magnetic field / Struktura nikal - nikal nanokontakta dobijenih elektrohemijskim taloženjem
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
Structures of Ni - Ni Nan contacts obtained by the electrode position at the different cathodic potentials were analyzed. Ni - Ni Nan contacts were electrodeposited from a Watt solution in the presence of coumarone, and ...
Fundamental aspects of copper electrodeposition in the hydrogen Co-deposition range
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
This a review paper considering fundamental aspects of copper electrodeposition at high overpotentials where parallel to copper electrodeposition, hydrogen evolution reaction occurs. The two types of copper deposits are ...
Corrosion of chromium white cast iron in acidic medium / Korozija visokohromnog belog gvožđa u kiseloj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
In this work we studied the electrochemical behavior of chromium white cast irons in deaerated aqueous sulphuric acid solutions of the pH 1-3. The measurements of concentrations of dissolved iron and chromium in the solution, ...
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
Analysis of morphologies of magnetic nanocontacts obtained by electrochemical deposition and their magnetoresistance / Analiza morfologija elektrohemijski dobijenih magnetnih nanokontakta i njihova magnetorezistencija
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, morphologies of Fe - Fe, Co - Co and Ni81Fel9 – Ni81Fe19 nanocontacts obtained by the electrode position were analyzed. The obtained nanocontacts showed a very large ballistic magnetoresistance. It was shown ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Comparison of morphology of powder particles obtained by the constant and periodically changing regimes of electrolysis / Poređenje morfologije čestica praha dobijenih konstantnim i periodično promenljivim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
Morphologies of copper powder particles obtained by both potentiostatic and pulsating overpotential (PO) regimes of electrolysis were analyzed using the technique of scanning electron microscopy (SEM). The parameters of ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...