Pretraživanje
Prikaz rezultata 1-10 od 23
Magnetic properties of ND Rich Melt-Spun ND-FE-B alloy
(International Institute for the Science of Sintering, Beograd, 2005)
As a part of these experimental investigations of melt-spun Nd-Fe-B alloy with Nd rich content in relation to Nd2Fe14B prepared by rapid quenching process for optimally selected cooling rate and heat treatment, the influence ...
Carbon-supported hydrous ruthenium oxide composite as electrochemical supercapacitors - 1. Preparation, Morphology and Characterization of the Composites / Kompozitni materijal hidratisani rutenijum oksid / ugljenik kao elektrohemijski superkondenzator 1. dobijanje, morfologija i karakterizacija kompozita
(Association of Chemical Engineers of Serbia, 2007)
Preparation of hydrous ruthenium oxide/carbon black nanocomposite material was performed by the impregnation method starting from hydrous RuO2 sol as a precursor. Black Pearls 2000 (R) (BP) and Vulcan (R) XC-72 R (XC) was ...
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
Activity of carbon supported Pt3Ru2 nanocatalyst in CO oxidation / Aktivnost Pt3Ru2/C nanokatalizatora u oksidaciji CO
(Serbian Chemical Society, 2009)
The electrocatalytic activity of Pt3Ru2/C nanocatalyst toward the electro-oxidation of bulk CO was examined in acid and alkaline solution at ambient temperature using the thin-film, rotating disk electrode (RDE) method. ...
The electrocatalytic properties of carbon supported PtRu/C nanoalloys in oxidation of small organic molecules: Comparison with Pt/C catalyst / Elektrokatalitičke osobine nanočestica legura PtRu/C u oksidaciji malih organskih molekula - poređenje sa katalizatorom Pt/C
(Association of Chemical Engineers of Serbia, 2012)
The electrocatalytic activity of carbon supported PtRu/C catalysts, with different composition, toward the electrooxidation of methanol, CO and formic acid were examined in acid and alkaline solution at ambient temperature ...
Evolution of microstructure of melt-spun Nd-Fe-B alloy with low Nd content during the heat treatment
(Metalurgija, 2004)
In order to examine and study evolution of microstructure during the phase transformations for applied heat treatment regime for achieving the optimal values of magnetic properties of the investigated melt-spun Nd-Fe-B ...
Influence of the Shape of Copper Powder Particles on the Crystal Structure and Some Decisive Characteristics of the Metal Powders
(MDPI, 2019)
Three different forms of Cu powder particles obtained by either galvanostatic electrolysis or a non-electrolytic method were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and particle size ...
An overstoichiometric Nd-Fe-B hard magnetic material / Nadstehiometrijski Nd-Fe-B tvrdi magnetni materijali
(Serbian Chemical Society, 2010)
A commercial Nd-rich Nd-Fe-B-based hard magnetic material was studied. The obtained results were compared before and after recording of the thermomagnetic curve up to 800 °C. The curve itself showed clearly besides Curie ...
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...