Претраживање
Приказ резултата 31-40 од 40
Fundamental aspects of plating technology II: Morphological aspects of metal electrodeposition from complex salt solutions
(Elsevier, 1983)
It is shown that the improved quality of electrodeposits obtained from ammonium complex salt solutions compared with deposits obtained from simple salt solutions is due to the decrease in the exchange current density value ...
The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
(Elsevier, 2015)
Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope ...
Synthesis and characterization of AgPd alloy coatings as beneficial catalysts for low temperature fuel cells application
(Elsevier, 2019)
The Ag, Pd and AgPd alloys of different morphologies and compositions were electrodeposited onto Au
and glassy carbon (GC) disc electrodes from the solution containing 0.001 M PdCl2 þ 0.04 M AgCl þ 0.1 M
HCl þ 12 M LiCl ...
Mechanism of formation of the honeycomb-like structures by the regime of the reversing current (RC) in the second range
(Elsevier, 2019)
Electrodeposition of copper in the hydrogen co-deposition range by the regime of reversing current (RC) in the second range has been investigated by determination of the average current efficiency for hydrogen evolution ...
Formation of two-dimensional (2D) lead dendrites by application of different regimes of electrolysis
(Springer, New York, 2012)
Electrodeposition of lead from nitrate electrolyte in constant regimes of electrolysis was analyzed and the obtained powder lead deposits were examined by scanning electron microscopy. Polarization curve for lead ...
Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition
(Elsevier, 2007)
Copper electrodeposition from acid sulfate solutions at an overpotential of 1000 mV, which is about 250 mV outside the plateau of the limiting diffusion current density, was examined by the determination of the average ...
Ballistic magnetoresistance versus magnetostriction effects in electrodeposited nanocontacts at room temperature
(Institute of Electrical and Electronics Engineers, Inc., 2003)
The authors present experiments and discuss recent results on ballistic magnetotesistance in nanometer size (on the order of 1 to 10 nm) nanocontacts grown by electrodeposition in
thin wires and in thin films of a few ...
Formation of needle-like and honeycomb-like magnesium oxide/hydroxide structures by electrodeposition from magnesium nitrate melts
(Oxford : Pergamon-Elsevier Science Ltd, 2018)
The processes of electrochemical deposition of magnesium oxide/hydroxide on glassy carbon (GC) electrode from magnesium nitrate hexahydrate melt have been investigated. A novel procedure predicting a possibility of direct ...
Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
(Springer-Verlag, 2020)
Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has been
investigated. Morphological and structural characteristics of this electrode type obtained by various ...
Morphology and composition of Ni-Co electrodeposited powders
(Elsevier Science Inc, New York, 2011)
The morphology, phase and chemical composition of Ni-Co alloy powders electrodeposited from an ammonium sulfate-boric acid containing electrolyte with different ratio of Ni/Co ions were investigated. The ratios of NVCo ...