Претраживање
Приказ резултата 11-20 од 81
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Influence of the structure of metallic chromium on its electrochemical and chemical corrosion / Uticaj strukture metalnog hroma na njegovu elektrohemijsku i hemijsku koroziju
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
It was shown that metallic chromium in aqueous solution of sulfuric acid dissolves in accord with the electrochemical mechanism proposed by Wagner and Traud, but also by a direct chemical reaction of metal with water ...
How to review a scientific paper / Kako recenzirati naučni rad
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
A review process is a key factor which ensures reliable and accurate presentation of new, useful, and original scientific knowledge to the public. Despite of many shortcomings which this evaluation of scientific work has, ...
Comparison of morphology of powder particles obtained by the constant and periodically changing regimes of electrolysis / Poređenje morfologije čestica praha dobijenih konstantnim i periodično promenljivim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
Morphologies of copper powder particles obtained by both potentiostatic and pulsating overpotential (PO) regimes of electrolysis were analyzed using the technique of scanning electron microscopy (SEM). The parameters of ...
Analysis of morphologies of magnetic nanocontacts obtained by electrochemical deposition and their magnetoresistance / Analiza morfologija elektrohemijski dobijenih magnetnih nanokontakta i njihova magnetorezistencija
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, morphologies of Fe - Fe, Co - Co and Ni81Fel9 – Ni81Fe19 nanocontacts obtained by the electrode position were analyzed. The obtained nanocontacts showed a very large ballistic magnetoresistance. It was shown ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...
Activated titanium anodes in cathodic protection: A comparison of the characteristics of anodes prepared by sol-gel procedure and thermal decomposition / Aktivirane titanske anode u katodnoj zaštiti - poređenje karakteristika anoda dobijenih sol-gel postupkom i termičkom razgradnjom
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Polarization characteristics of titanium anodes, coated by active RuO2-TiO2 binary oxide using sol-gel preparation procedure and chloride thermal decomposition, in oxygen evolution reaction during anode electrolytic ...