Претраживање
Приказ резултата 11-20 од 32
Structures of Ni - Ni Nan contacts obtained by the electrode position in the presence of a magnetic field / Struktura nikal - nikal nanokontakta dobijenih elektrohemijskim taloženjem
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
Structures of Ni - Ni Nan contacts obtained by the electrode position at the different cathodic potentials were analyzed. Ni - Ni Nan contacts were electrodeposited from a Watt solution in the presence of coumarone, and ...
Electrochemically deposed Ni/W composite coatings obtained under constant and pulsating current regimes / Kompozitne Ni/WC prevlake dobijene elektrohemijskim taloženjem konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
The properties of composite coatings are dependent on properties of the base metal, as well as on properties of incorporating particles. The Ni / W composite coatings were obtained by electro deposition from commercially ...
The roughness analysis of metal coatings by STM technique part III: Analysis of copper coatings electrodeposited with thiourea as brightening additive / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije III deo - analiza prevlaka bakra istaloženih sa tioureom kao aditivom za sjaj
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodeposited from a sulfate bath in the presence of thiourea, by methodology which is described in part I of this work. It was shown that the ...
The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology ...
Corrosion causes in thermal power plants and ways of prevention / Uzroci korozije u termoenergetskim postrojenjima i načini prevencije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Corrosion damages often exert considerable influence on outages number and hence on the loss of thermal power plant availability. In order to accomplish the aim of reducing the corrosion to it's minimum and prevent main ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...
Influence of the structure of metallic chromium on its electrochemical and chemical corrosion / Uticaj strukture metalnog hroma na njegovu elektrohemijsku i hemijsku koroziju
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
It was shown that metallic chromium in aqueous solution of sulfuric acid dissolves in accord with the electrochemical mechanism proposed by Wagner and Traud, but also by a direct chemical reaction of metal with water ...
Morphology of Ni-Mo-O alloy powders electrodeposited from ammonium sulfate solutions / Morfologija prahova Ni-Mo-O legura istaloženih elektrohemijskim postupkom iz rastvora amonijum sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
The electro deposition of the Ni-Mo-O alloy powders from ammonium sulfate containing electrolytes of different Ni/Mo ions concentration ratios was investigated by the polarization measurements. In all electrolytes similar ...
The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum / Uticaj fluorida i pH vrednosti elektrolita na strukturu prevlaka bakra istaloženih na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The copper coatings were electrodeposited directly onto aluminum from the following solution: CuSO4-⋅5H2O (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) (NH4)2SO4 (30 g/dm3) + Na2SO4 - 10H2O (75 g/dm3) + Na2CO3 (3g/dm3), room ...