JavaScript is disabled for your browser. Some features of this site may not work without it.
The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition
Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala
In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology which is described in part I of this work. It was shown that the electrodeposition of copper in the presence of these additives follows KPZ model. On the basis of the obtained results, mechanisms which can lead to electrodeposition of bright metal coatings are proposed.
U ovom radu je data analiza hrapavosti prevlaka bakra istaloženih iz sulfatnog kupatila sa dodatkom modifikovanog poliglikol etra, polifetilen glikol)-a Mn = 6000 (PEG 6000) i 3 - merkapto alkan sulfonata kao aditiva za sjaj, metodologijom koja je opisana u I delu ovog rada. Pokazano je da se taloženje bakra u prisustvu ovih aditiva odvija po mehanizmu koji sledi KPZ model. Na osnovu dobijenih rezultata, predloženi su mehanizmi koji mogu da dovedu do taloženja sjajnih metalnih prevlaka.
Source:
Zaštita materijala, 2003, 44, 2-3, 63-66
Publisher:
Belgrade, Serbia : Engineering Society for Corrosion
TY - JOUR
AU - Nikolić, Nebojša D.
AU - Rakočević, Zlatko Lj.
AU - Popov, Konstantin I.
PY - 2003
UR - https://cer.ihtm.bg.ac.rs/handle/123456789/128
AB - In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology which is described in part I of this work. It was shown that the electrodeposition of copper in the presence of these additives follows KPZ model. On the basis of the obtained results, mechanisms which can lead to electrodeposition of bright metal coatings are proposed.
AB - U ovom radu je data analiza hrapavosti prevlaka bakra istaloženih iz sulfatnog kupatila sa dodatkom modifikovanog poliglikol etra, polifetilen glikol)-a Mn = 6000 (PEG 6000) i 3 - merkapto alkan sulfonata kao aditiva za sjaj, metodologijom koja je opisana u I delu ovog rada. Pokazano je da se taloženje bakra u prisustvu ovih aditiva odvija po mehanizmu koji sledi KPZ model. Na osnovu dobijenih rezultata, predloženi su mehanizmi koji mogu da dovedu do taloženja sjajnih metalnih prevlaka.
PB - Belgrade, Serbia : Engineering Society for Corrosion
T2 - Zaštita materijala
T1 - The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition
T1 - Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala
VL - 44
IS - 2-3
SP - 63
EP - 66
UR - https://hdl.handle.net/21.15107/rcub_cer_128
ER -
@article{
author = "Nikolić, Nebojša D. and Rakočević, Zlatko Lj. and Popov, Konstantin I.",
year = "2003",
abstract = "In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology which is described in part I of this work. It was shown that the electrodeposition of copper in the presence of these additives follows KPZ model. On the basis of the obtained results, mechanisms which can lead to electrodeposition of bright metal coatings are proposed., U ovom radu je data analiza hrapavosti prevlaka bakra istaloženih iz sulfatnog kupatila sa dodatkom modifikovanog poliglikol etra, polifetilen glikol)-a Mn = 6000 (PEG 6000) i 3 - merkapto alkan sulfonata kao aditiva za sjaj, metodologijom koja je opisana u I delu ovog rada. Pokazano je da se taloženje bakra u prisustvu ovih aditiva odvija po mehanizmu koji sledi KPZ model. Na osnovu dobijenih rezultata, predloženi su mehanizmi koji mogu da dovedu do taloženja sjajnih metalnih prevlaka.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition, Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala",
volume = "44",
number = "2-3",
pages = "63-66",
url = "https://hdl.handle.net/21.15107/rcub_cer_128"
}
Nikolić, N. D., Rakočević, Z. Lj.,& Popov, K. I.. (2003). The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 44(2-3), 63-66.
https://hdl.handle.net/21.15107/rcub_cer_128
Nikolić ND, Rakočević ZL, Popov KI. The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition. in Zaštita materijala. 2003;44(2-3):63-66.
https://hdl.handle.net/21.15107/rcub_cer_128 .
Nikolić, Nebojša D., Rakočević, Zlatko Lj., Popov, Konstantin I., "The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition" in Zaštita materijala, 44, no. 2-3 (2003):63-66,
https://hdl.handle.net/21.15107/rcub_cer_128 .
