Претраживање
Приказ резултата 1-10 од 40
Fundamental aspects of pulsating current metal electrodeposition VIII: The effect of pause-to-pulse ratio on microthrowing power of metal deposition
(Elsevier, 1984)
The effect of a pulsating current on the microthrowing power of metal deposits in the early stage of deposition was investigated by scanning electron microscopy. It is shown that at the same average current density the ...
Identification of intermetallic compounds in thin layers of electrodeposited Cu–Cd alloys using electrochemical techniques
(USA :Taylor & Francis INC, 1991)
An attempt was made to analyse the phase structure of thin layers of electrodeposited Cu–Cd alloys using anodic linear sweep voltammetry combined with a potentiostatic pulse technique (ALSV–PPT). The results were compared ...
The effects of the pause to pulse ratio in the regime of pulsating overpotential on the formation of honeycomb-like structures
(Elsevier Science Inc, New York, 2009)
The formation of honeycomb-like structures in the pulsating overpotential (PO) regime was examined by scanning electron microscopy (SEM). The honeycomb-like structures obtained with a square-wave PO of different pause to ...
Effect of codeposition of polymer on the morphology of electrodeposited copper
(Kluwer Academic Publishers, 1979)
Poly(4-vinyl pyridine-co-methyl methacrylate), which is soluble in water in its protonated form and insoluble as a neutral molecule, has been synthesized and introduced into an acid bath for copper deposition. Potential-sweep ...
Nanostructural Analysis of Mirror – Bright Zinc Coatings
(MAIK "Nauka /Interperiodica" (Russia), 2006)
The zinc coatings electrode posited from solution containing dextrin/salicyl aldehyde mixture are
examined by the scanning tunneling microscopy (STM). It is shown that mirror brightness of these zinc deposits is associated ...
A new insight into the mechanism of lead electrodeposition: Ohmic-diffusion control of the electrodeposition process
(Elsevier, 2013)
A new insight into the mechanism of lead electrodeposition from nitrate solutions is presented by analysis of the polarization characteristics and by scanning electron microscopic (SEM) analysis of the surface morphology ...
Anodic deposition of colloidal gold
(Elsevier, 1984)
Colloidal gold solutions were prepared following classical recipes. When electrolysed between graphite electrodes, gold was found to deposit at the anode. The rate of deposition was dependent on the anode potential, on the ...
Structural characteristics of bright copper surfaces
(Journal of Electroanalytical Chemistry, 2001)
In this work, the structures of copper surfaces polished mechanically and polished both mechanically and electrochemically, as well as copper coatings obtained in the presence of basic and top brightening addition agents ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to
3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Morphology of Electrochemically and Chemically Deposited Metals
(Springer Science and Business Media LLC, 2016)
This book describes the newest achievements in the area of electrochemically and chemically deposited metals and alloys. In particular, the book is devoted to the surface morphology of deposited metals and alloys. It ...