Претраживање
Приказ резултата 1-10 од 79
New method of the determination of specific surface of copper obtained by the electrodeposition / Novi metod određivanja specifične površine elektrohemijski istaloženog bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2007)
The specific surface of electrodeposited copper was determined using recently proposed way for the estimation of the real surface area of metal deposits. The obtained values of the specific surface of copper deposits were ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
Magneto electrochemistry: Basic facts and the effects of the applied magnetic fields onto corrosion of metals, mass transfers, kinetic of process and the preferred orientation of deposits / Magneto-elektrohemija - osnovne činjenice i uticaji primenjenog magnetnog polja na koroziju metala, prenos mase, kinetiku procesa i preferencijalnu orijentaciju taloga
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, the theoretical survey of the basic facts about magneto electrochemistry will be given. It will be analyzed the effects of the applied magnetic fields on kinetic of the electrochemical processes, mass transfer ...
Fundamental aspects of copper electrodeposition in the hydrogen Co-deposition range
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
This a review paper considering fundamental aspects of copper electrodeposition at high overpotentials where parallel to copper electrodeposition, hydrogen evolution reaction occurs. The two types of copper deposits are ...
The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology ...
Electrochemically deposed Ni/W composite coatings obtained under constant and pulsating current regimes / Kompozitne Ni/WC prevlake dobijene elektrohemijskim taloženjem konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
The properties of composite coatings are dependent on properties of the base metal, as well as on properties of incorporating particles. The Ni / W composite coatings were obtained by electro deposition from commercially ...
The roughness analysis of metal coatings by STM technique part III: Analysis of copper coatings electrodeposited with thiourea as brightening additive / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije III deo - analiza prevlaka bakra istaloženih sa tioureom kao aditivom za sjaj
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodeposited from a sulfate bath in the presence of thiourea, by methodology which is described in part I of this work. It was shown that the ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Effect of supporting electrolyte on electrolytic degradation of cyanide wastewater / Uticaj hloridnih jona na elektrohemijsku oksidaciju cijanida u otpadnim vodama
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
The paper describes the influence of chloride ions on the electrochemical oxidation of cyanide from wastewater. Chloride ions are added in the form of NaCl (c=0.017 mol/L), and electrochemical oxidation is carried out in ...
Investigation of phenol adsorption on macroporous polymeric adsorbents / Ispitivanje adsorpcije fenola na makroporoznim polimernim adsorbensima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
This work reports results on phenol adsorption from aqueous solution by porous copolymers based on glycidyl methacrylate: two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), ...