Претраживање
Приказ резултата 1-7 од 7
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...
Microstructure, roughness, and corrosion resistance of X5CrNi18-10 austenite stainless steel welded joint / X Mikrostruktura , hrapavost i otpornost na koroziju zavarenog spoja austenitnog nerđajućeg čelika X5CrNi18-10
(Belgrade : Serbian Chemical Society, 2021)
The influence of the microstructure of X5CrNi18-10 stainless steel welded joint on its resistance to general, pitting, and intergranular corrosion was analyzed. The structure of weld metal, heat affected zone (HAZ) and ...
Influence of treatment of various carbon supports on electrochemical activity of Pt catalysts
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
In this study, influence of physical-chemical and electrochemical treatments of various carbon supports on electrochemical activity of Pt catalysts for methanol reaction oxidation has been investigated.
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Optimization of electrodeposition parameters to improve composite hardness of nickel coatings on brass substrate for varying film thicknesses and applied indentation loads
(Belgrade : ETRAN Society, 2022)
In this investigation, nickel coatings were electrodeposited on brass substrate. The effects of
electrodeposition process parameters such as, current density and deposition time (coatings thickness), on surface morphology ...
The effect of poly(dimethylsiloxane) segment content on the morphology of polyurethane composite materials
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
in this study, in situ polymerization procedure in solvent mixture was used for the preparation of thermosetting PU nanocomposites (PUNCs) with different content of soft segment (from 30 to 60 wt%), and with the addition ...
Elucidating the antibiofilm activity of Frangula emodin against Staphylococcus aureus biofilms
(Wiley, 2022)
Aims Because the Staphylococcus aureus is one of the most well‐known pathogens associated with medical devices and nosocomial infections, the aim of the study was to examine antibiofilm potential of emodin against it. ...