Претраживање
Приказ резултата 11-20 од 40
Fundamental aspects of pulsating current metal electrodeposition IX: The prevention of spongy deposit formation on inert substrates
(Elsevier, 1984)
It is shown that spongy deposits are obtained under d.c. conditions and that compact deposits are obtained in pulsating current (PC) deposition with high pause-to-pulse ratios at the same average current density and ...
Electrodeposited Pd and PdNi coatings as electrodes for the electrochemical oxidation of ethanol in alkaline media
(Springer, New York, 2017)
Electrodeposition of Pd and PdNi coating samples of different thicknesses, depending on the coating composition and current efficiency, was achieved galvanostatically on the rotating Au disc electrode from the plating bath ...
Identification of intermetallic compounds in thin layers of electrodeposited Cu–Cd alloys using electrochemical techniques
(USA :Taylor & Francis INC, 1991)
An attempt was made to analyse the phase structure of thin layers of electrodeposited Cu–Cd alloys using anodic linear sweep voltammetry combined with a potentiostatic pulse technique (ALSV–PPT). The results were compared ...
Effect of codeposition of polymer on the morphology of electrodeposited copper
(Kluwer Academic Publishers, 1979)
Poly(4-vinyl pyridine-co-methyl methacrylate), which is soluble in water in its protonated form and insoluble as a neutral molecule, has been synthesized and introduced into an acid bath for copper deposition. Potential-sweep ...
The effects of the pause to pulse ratio in the regime of pulsating overpotential on the formation of honeycomb-like structures
(Elsevier Science Inc, New York, 2009)
The formation of honeycomb-like structures in the pulsating overpotential (PO) regime was examined by scanning electron microscopy (SEM). The honeycomb-like structures obtained with a square-wave PO of different pause to ...
Fundamental aspects of plating technology II: Morphological aspects of metal electrodeposition from complex salt solutions
(Elsevier, 1983)
It is shown that the improved quality of electrodeposits obtained from ammonium complex salt solutions compared with deposits obtained from simple salt solutions is due to the decrease in the exchange current density value ...
Some aspects of current density distribution in electrolytic cells I: Dendritic growth of cadmium at the cathode edge in galvanostatic electrodeposition
(Elsevier, 1983)
The equivalent electrical resistance of a cell with plane parallel electrodes is described by a simple mathematical model. The limits of this model were determined experimentally. The relation between the overpotential at ...
Electrochemical deposition and characterization of Zn /Co alloys and corrosion protection by electrodeposited epoxy coating on Zn /Co alloy
(Elsevier, 2002)
Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure ...
Electrodeposited AgPd alloy coatings as efficient catalysts for the ethanol oxidation reaction
(Oxford : Pergamon-Elsevier Science Ltd, 2018)
The Pd and three AgPd alloy layers (AgPd1, AgPd2 and AgPd3) were electrodeposited onto Au disc electrodes from the solution containing high concentration of chloride ions (>12 M). All coatings were investigated by scanning ...
TiO2/SnO2 photocatalyst formed by plasma electrolytic oxidation
(Elsevier, 2017)
TiO2/SnO2 coatings are formed by plasma electrolytic oxidation of titanium substrate in supporting electrolyte (10 g/L Na3PO4 center dot 12H(2)O) with addition of various concentrations of SnO2 particles. Photocatalytic ...