Претраживање
Приказ резултата 11-20 од 40
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Characterization and Morphology of Copper Powder Particles as a Function of Different Electrolytic Regimes
(Esg, Belgrade, 2010)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The results obtained in constant regimes were compared with those obtained in ...
Influence of regime of electrolysis on morphology and structure of copper dendrites / Uticaj režima elektrolize na morfologiju i strukturu dendrita bakra
(Belgrade : Serbian Society of Corrosion and Materials Protection UISKOZAM, 2021)
Comparative analysis of morphological and structural features of copper dendrites obtained by potentiostatic and galvanostatic regimes of electrolysis was made. The 3D (three dimensional) pine-like dendrites composed from ...
Preparation and characterization of poly(Urethane-siloxane)/titanium-dioxide nanocomposites
(Belgrade : Association of the Chemical Engineers of Serbia, 2019)
This work is focused on preparation of poly(urethane-siloxane)/titanium-dioxide nanocomposites (PUSNs) with enhanced features. PUSNs were prepared by the in situ polymerization reaction using titanium-dioxide as a nano-filler ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Study on the morphology and thermomechanical properties of poly(urethane-siloxane) networks based on hyperbranched polyester / Proučavanje morfologije i termomehaničkih svojstava umreženih poli(uretan-siloksana) na bazi hiperrazgranatog poliestra
(Association of Chemical Engineers of Serbia, 2013)
Two series of polyurethane films based on hyperbranched polyester of the second pseudo-generation (Boltorn®), 4,4'-methylenediphenyl diisocyanate and two different siloxane prepolymers, α,ω-dihydroxy-(ethylene oxide-poly ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...