Претраживање
Приказ резултата 1-8 од 8
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...
Influence of regime of electrolysis on morphology and structure of copper dendrites / Uticaj režima elektrolize na morfologiju i strukturu dendrita bakra
(Belgrade : Serbian Society of Corrosion and Materials Protection UISKOZAM, 2021)
Comparative analysis of morphological and structural features of copper dendrites obtained by potentiostatic and galvanostatic regimes of electrolysis was made. The 3D (three dimensional) pine-like dendrites composed from ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...