Претраживање
Приказ резултата 1-10 од 15
The influence of chemical composition on microstructure, hardness and electrical conductivity of Ag-Bi-In alloys at 100 degrees C
(Serbia : Association of Metallurgical Engineers of Serbia AMES, 2017)
Considering possible applications and scarceness of literature data, Ag-Bi-In system was investigated in terms of microstructure, mechanical and electrical properties of ternary alloys from an isothermal section at 100 °C. ...
Mechanical and electrical properties of ternary Ag-Bi-Ga system at 250 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
This paper presents a comparative review of the experimental and thermodynamic assessment of a ternary Ag-Bi-Ga system. An isothermal section at 250 °C was calculated using optimized thermodynamic data for the constitutive ...
Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
Pitting corrosion resistance and intergranular corrosion of the austenitic stainless steel X5Cr Ni18-10 were tested on the base metal, heat affected zone and weld metal. Testing of pitting corrosion was performed by the ...
Ternary Bi-Cu-Ni alloys – thermodynamics, characterization, mechanical and electrical properties
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution ...
Professor Dr. Dragana T. Živković – biography
(Serbia : Metallurgical & Materials Engineering, 2017)
On 26 November 2016, Professor dr DRAGANA ŽIVKOVIĆ passed away. She was a full-time professor and Dean of the Technical Faculty in Bor, University of Belgrade, Editor-in-Chief of the Journal of Mining and Metallurgy, Section ...
Corrosion testing of sa 387 gr. 91 steel
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Corrosion behaviour of steel Sa 387 Gr. 91 is tested in solutions containing chloride and sulphate anions. These solutions simulate the conditions of marine and industrial atmosphere. The tests are carried out in a slightly ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
How to review a scientific paper / Kako recenzirati naučni rad
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
A review process is a key factor which ensures reliable and accurate presentation of new, useful, and original scientific knowledge to the public. Despite of many shortcomings which this evaluation of scientific work has, ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Numerical simulation of 3D multiphase flow is performed to determine the velocity field in the fan mill. The mixture model of the Euler-Euler approach is used. Recirculating gas is a primary phase that carries granular ...