Претраживање
Приказ резултата 21-30 од 1132
Analysis of forced periodic operations of non-isothermal CSTR with modulation of inlet concentration and temperature
(8th European Congress of Chemical Engineering (ECCE 2011), Berlin, Germany, 2011)
One way to achieve process intensification is to operate the process in a periodic way, in order to obtain better average performance compared to the optimal steady-state operation. The source of the possible improvement ...
Methods for Removal of Phenol from Wastewater / Metode uklanjanja fenola iz otpadne vode
(University of Kragujevac, Faculty of Agronomy, Čačak, 2017)
Phenol is a major pollutant in the wastewater because of its presence in the effluent of major processing and refining plants. It has severe effect on human being, both short term and long term. Various methods are used ...
Micromachining by maskless wet anisotropic etching {hkl} structures on {100} oriented silicon
(27th International Conference on Microelectronics, MIEL 2010 - Proceedings, 2010)
The paper presents investigation of micromechanical technique using 3D anisotropically etched Si structures. Ridge-like structure oriented along LT 110> direction is first etched with mask following maskless etching in ...
Biodiesel synthesis over green catalyst: The effect of thermal treatment of CaO/Zeolite precursor on catalytic activity
(2019)
Poster presented at Seventh Conference of the Young Chemists of Serbia, 2nd November 2019
Fermentation of lignocellulosic renewable resources and hydrogen production
(The Academy of Sciences and Arts of the Republic of Srpska, 2016)
Using cheap renewable raw materials such as lignocellulosic feedstock for hydrogen production by fermentation has great significance and potential to give a major contribution to future clean energy. Using hydrogen as a ...
Evaluation of periodic processes with two modulated inputs based on nonlinear frequency response analysis
(2011)
One way to achieve process intensification is to operate the process in a periodic way, in order to obtain better average performance compared to the optimal steady-state operation. The source of the possible improvement ...
Thermo-mechanical properties of rigid polyurethane foams with cement addition
(Society of Chemists and Technologists of Macedonia, 2016)
The parameters of foam preparation, such as addition of fillers, have a significant effect on the properties of polyurethane foams. The goal of this work was to study the effect of the cement addition on the thermo-mechanical ...
Superkritična ekstrakcija kao metoda za uklanjanje pesticida iz zemljišta
(Univerzitet u Kragujevcu, Agronomski fakultet u Čačku, 2016)
Cilj ovog rada je ukazivanje na mogućnost primene superkritične ekstrakcije sa ugljendioksidom na dekontaminaciju zemljišta zagađenih pesticidima (u ovom slučaju atrazinom). Analizirani rezultati ukazuju da se ova metoda ...
Customization of evanescent near fields on freestanding plasmonic nanomembranes
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2018)
For a very long time optical evanescent near fields have been considered useless for practical applications and remained a theoretical curiosity. However, with advances in micro and nanotechnologies and the decreasing sizes ...
A systematic literature rewiew in the domain of ISO 9001 certification and business improvement
(University of Belgrade, Faculty of Mechanical Engineering, 2018)
In this systematic review the impact of ISO 9001 certification on business performance is addressed. A total of thirty (n=30) scientific articles in the domain of ISO 9001 certification are thoroughly analysed. The sum of ...