Претраживање
Приказ резултата 21-30 од 81
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni þ WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)
from a commercially available Watts bath containing additives for brightness and smoothing and insoluble ...
The role of surface defects in HOPG on the electrochemical and physical deposition of Ag / Uloga površinskih defekata na HOPG-u u elektrohemijskoj I fizičkoj depoziciji Ag
(Belgrade : Serbian Chemical Society, 1999)
The role of defects on a substrate surface during the initial stages of nucleation and growth of Ag deposited electrochemically and physically on highly oriented pyrolytic graphite (HOPG) has been observed ex situ by ...
Formation of the honeycomb-like electrodes by the regime of pulsating overpotential in the second range
(International Association of Physical Chemists (IAPC), 2012)
In this study the honeycomb-like copper structures electrodeposited by the regime of pulsating overpotential in the second range were analyzed by the technique of scanning electron microscopy. The overpotential amplitude ...
The effect of hydrogen co-deposition on the morphology of copper electrodeposits. II. Correlation between the properties of electrolytic solutions and the quantity of evolved hydrogen
(Elsevier, 2008)
Formation of irregular deposits by electrodeposition from acid sulfate solutions of various H2SO4 concentrations was examined by the determination of the average current efficiency of hydrogen evolution and by the scanning ...
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
The effect of perpendicularly oriented magnetic field on the formation of very disperse iron structures / Uticaj vertikalno orijentisanog magnetnog polja na formiranje veoma disperznih struktura gvožđa
(Serbian Chemical Society, 2006)
Iron deposits obtained without and with a perpendicularly oriented magnetic field were examined by scanning electron microscopy (SEM). It was found that the iron deposit obtained under a perpendicularly oriented magnetic ...
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...
Morphology and structure of bright electrodeposited metal coatings
(Soc Chemists Technologists Madeconia, Skopje, 2011)
The properties which determine whether the metal surface is mirror bright are precisely determined by scanning electron microscopy (SEM), atomic forces microscopy (AFM), scanning tunneling microscopy (STM) and reflectance ...