Претраживање
Приказ резултата 11-20 од 30
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Study on the morphology and thermomechanical properties of poly(urethane-siloxane) networks based on hyperbranched polyester / Proučavanje morfologije i termomehaničkih svojstava umreženih poli(uretan-siloksana) na bazi hiperrazgranatog poliestra
(Association of Chemical Engineers of Serbia, 2013)
Two series of polyurethane films based on hyperbranched polyester of the second pseudo-generation (Boltorn®), 4,4'-methylenediphenyl diisocyanate and two different siloxane prepolymers, α,ω-dihydroxy-(ethylene oxide-poly ...
The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers
(MDPI, 2020)
The BaTiO3 ceramics applications based on electronic properties have very high gradient
scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3
modified with Yttrium based ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders
(Elsevier, 2020)
Nickel−cobalt (Ni−Co) alloy powders were produced galvanostatically by using sulphate electrolytes with
various ratios of Ni2+/Co2+ (mole ratios). The morphology, phase structure, chemical composition and magnetic
properties ...
Characterization and Morphology of Copper Powder Particles as a Function of Different Electrolytic Regimes
(Esg, Belgrade, 2010)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The results obtained in constant regimes were compared with those obtained in ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Electrodeposition of Fe Powder from Citrate Containing Electrolytes
(Esg, Belgrade, 2010)
Polarization characteristics of the electrodeposition processes of Fe powders from different citrate electrolytes and the morphology of the obtained powders were investigated. The effect of complexing agents on the cathodic ...