Претраживање
Приказ резултата 21-30 од 32
The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings / Uticaj gustine struje, vremena taloženja i pH – vrednosti elektrolita na hrapavost prevlaka bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
The copper coatings were electrodeposited directly onto aluminium from the bath: (CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100g/ dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4(10H2O (75g/dm3) + Na2CO3 (3g/dm3), room temperature, j = 0.3 ...
Properties of Ni-W alloys electrochemically deposited by direct and pulse current / Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters ...
The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs / Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. II deo, Morfologija i struktura elektrohemijski istaloženih prevlaka metala
(Belgrade, Serbia : Engineering Society for Corrosion, 2007)
The properties which determine whether the metal surface is mirror bright are precisely determined by STM investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which ...
The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum / Uticaj fluorida i pH vrednosti elektrolita na strukturu prevlaka bakra istaloženih na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The copper coatings were electrodeposited directly onto aluminum from the following solution: CuSO4-⋅5H2O (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) (NH4)2SO4 (30 g/dm3) + Na2SO4 - 10H2O (75 g/dm3) + Na2CO3 (3g/dm3), room ...
The morphology of copper powder obtained by different regimes of electrolysis / Morfologija bakarnog praha dobijenog različitim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder were investigated using a ...
The roughness of silver coatings electrodeposited onto aluminium / Hrapavost prevlaka srebra taloženih galvanostatskim putem na aluminijum
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
In this paper the surface roughness of silver coatings electrodeposited as final coatings onto aluminum was analyzed. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, nickel and ...
The effect of preparation of aluminum surface on surface roughness / Uticaj pripreme površine aluminijuma na površinsku hrapavost
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also ...
Direct electroplating of copper coatings onto aluminum / Neposredno elektrohemijsko taloženje prevlaka bakra na aluminijum
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The deposition of copper coatings has been done by direct electrochemical deposition from the solution: CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4*10H2O (75 g/dm3) + Na2CO3 (3 g/dm3), ...
The effect of preparation of aluminum surface on surface reflection / Uticaj pripreme površine aluminijuma na površinsku refleksiju
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the ...
Electroplating of silver onto aluminum and its alloys / Elektrohemijsko taloženje prevlaka srebra na aluminijum i njegove legure
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this paper the structural characteristics of silver coatings electrodeposited as final coatings onto aluminum were shown. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, ...