JavaScript is disabled for your browser. Some features of this site may not work without it.
The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs
Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. II deo, Morfologija i struktura elektrohemijski istaloženih prevlaka metala
The properties which determine whether the metal surface is mirror bright are precisely determined by STM investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by flat and mutually parallel parts of the surface which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection.
Osobine koje određuju da li je metalna površina ogledalski sjajna ili ne su precizno određene AFM i STM ispitivanjima. Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Ogledalski sjaj prevlaka bakra i površina bakra glačanih i mehanički i elektrohemijski je određen ravnim i međusobno paralelenim, atomski glatkim delovima površine koji ukazuju na njihovu slojevitu strukturu. Ogledalski sjajne metalne površine mogu da se dobiju jedino elektrohemijskim glačanjem ili elektrohemijskim taloženjem u prisustvu dodataka za sjaj. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.
Keywords:
electrochemical deposition of coatings / structure / surface reflection of the light / bright of metal coatings / roughness / elektrohemijsko taloženje metala / struktura / refleksija svetlosti / sjaj metalnih prevlaka / hrapavost
Source:
Zaštita materijala, 2007, 48, 4, 19-31
Publisher:
Belgrade, Serbia : Engineering Society for Corrosion
TY - JOUR
AU - Pavlović, Ljubica
AU - Pavlović, Miroslav M.
AU - Arsenović, Božidarka
AU - Nikolić, Nebojša D.
AU - Popov, Konstantin I.
AU - Pavlović, Miomir
PY - 2007
UR - https://cer.ihtm.bg.ac.rs/handle/123456789/316
AB - The properties which determine whether the metal surface is mirror bright are precisely determined by STM investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by flat and mutually parallel parts of the surface which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection.
AB - Osobine koje određuju da li je metalna površina ogledalski sjajna ili ne su precizno određene AFM i STM ispitivanjima. Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Ogledalski sjaj prevlaka bakra i površina bakra glačanih i mehanički i elektrohemijski je određen ravnim i međusobno paralelenim, atomski glatkim delovima površine koji ukazuju na njihovu slojevitu strukturu. Ogledalski sjajne metalne površine mogu da se dobiju jedino elektrohemijskim glačanjem ili elektrohemijskim taloženjem u prisustvu dodataka za sjaj. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.
PB - Belgrade, Serbia : Engineering Society for Corrosion
T2 - Zaštita materijala
T1 - The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs
T1 - Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. II deo, Morfologija i struktura elektrohemijski istaloženih prevlaka metala
VL - 48
IS - 4
SP - 19
EP - 31
UR - https://hdl.handle.net/21.15107/rcub_cer_316
ER -
@article{
author = "Pavlović, Ljubica and Pavlović, Miroslav M. and Arsenović, Božidarka and Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlović, Miomir",
year = "2007",
abstract = "The properties which determine whether the metal surface is mirror bright are precisely determined by STM investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by flat and mutually parallel parts of the surface which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection., Osobine koje određuju da li je metalna površina ogledalski sjajna ili ne su precizno određene AFM i STM ispitivanjima. Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Ogledalski sjaj prevlaka bakra i površina bakra glačanih i mehanički i elektrohemijski je određen ravnim i međusobno paralelenim, atomski glatkim delovima površine koji ukazuju na njihovu slojevitu strukturu. Ogledalski sjajne metalne površine mogu da se dobiju jedino elektrohemijskim glačanjem ili elektrohemijskim taloženjem u prisustvu dodataka za sjaj. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs, Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. II deo, Morfologija i struktura elektrohemijski istaloženih prevlaka metala",
volume = "48",
number = "4",
pages = "19-31",
url = "https://hdl.handle.net/21.15107/rcub_cer_316"
}
Pavlović, L., Pavlović, M. M., Arsenović, B., Nikolić, N. D., Popov, K. I.,& Pavlović, M.. (2007). The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 48(4), 19-31.
https://hdl.handle.net/21.15107/rcub_cer_316
Pavlović L, Pavlović MM, Arsenović B, Nikolić ND, Popov KI, Pavlović M. The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs. in Zaštita materijala. 2007;48(4):19-31.
https://hdl.handle.net/21.15107/rcub_cer_316 .
Pavlović, Ljubica, Pavlović, Miroslav M., Arsenović, Božidarka, Nikolić, Nebojša D., Popov, Konstantin I., Pavlović, Miomir, "The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs" in Zaštita materijala, 48, no. 4 (2007):19-31,
https://hdl.handle.net/21.15107/rcub_cer_316 .
