Претраживање
Приказ резултата 1-10 од 32
New method of the determination of specific surface of copper obtained by the electrodeposition / Novi metod određivanja specifične površine elektrohemijski istaloženog bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2007)
The specific surface of electrodeposited copper was determined using recently proposed way for the estimation of the real surface area of metal deposits. The obtained values of the specific surface of copper deposits were ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
Magneto electrochemistry: Basic facts and the effects of the applied magnetic fields onto corrosion of metals, mass transfers, kinetic of process and the preferred orientation of deposits / Magneto-elektrohemija - osnovne činjenice i uticaji primenjenog magnetnog polja na koroziju metala, prenos mase, kinetiku procesa i preferencijalnu orijentaciju taloga
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, the theoretical survey of the basic facts about magneto electrochemistry will be given. It will be analyzed the effects of the applied magnetic fields on kinetic of the electrochemical processes, mass transfer ...
The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology ...
Electrochemically deposed Ni/W composite coatings obtained under constant and pulsating current regimes / Kompozitne Ni/WC prevlake dobijene elektrohemijskim taloženjem konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
The properties of composite coatings are dependent on properties of the base metal, as well as on properties of incorporating particles. The Ni / W composite coatings were obtained by electro deposition from commercially ...
The roughness analysis of metal coatings by STM technique part III: Analysis of copper coatings electrodeposited with thiourea as brightening additive / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije III deo - analiza prevlaka bakra istaloženih sa tioureom kao aditivom za sjaj
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodeposited from a sulfate bath in the presence of thiourea, by methodology which is described in part I of this work. It was shown that the ...
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Activated titanium anodes in cathodic protection: A comparison of the characteristics of anodes prepared by sol-gel procedure and thermal decomposition / Aktivirane titanske anode u katodnoj zaštiti - poređenje karakteristika anoda dobijenih sol-gel postupkom i termičkom razgradnjom
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Polarization characteristics of titanium anodes, coated by active RuO2-TiO2 binary oxide using sol-gel preparation procedure and chloride thermal decomposition, in oxygen evolution reaction during anode electrolytic ...
Analysis of morphologies of magnetic nanocontacts obtained by electrochemical deposition and their magnetoresistance / Analiza morfologija elektrohemijski dobijenih magnetnih nanokontakta i njihova magnetorezistencija
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, morphologies of Fe - Fe, Co - Co and Ni81Fel9 – Ni81Fe19 nanocontacts obtained by the electrode position were analyzed. The obtained nanocontacts showed a very large ballistic magnetoresistance. It was shown ...