Претраживање
Приказ резултата 1-6 од 6
Structural effects in electrocatalysis: Formic acid oxidation at model and real Pt catalysts
(Materials Science Forum, 2006)
Formic acid oxidation was studied at low-index Pt single crystals (model systems) as well as at the platinum catalyst supported on high area carbon (real catalyst) in HClO4. The Pt single crystals were characterized by ...
Morphology and phase composition of Ni-Co alloy powders electrodeposited from ammonium sulfate-boric acid electrolyte
(Materials Science Forum, 2006)
In this paper the morphology of Ni-Co powders electrodeposited from ammonium sulfate-boric acid containing electrolyte is investigated as a function of alloy powder composition. Composition of the electrolyte, i.e. the ...
A study of water influence on carbon monoxide adsorption and oxidation on nanocrystals of: γ-Fe2O3, Au/Fe2O 3 and MnxZn1-xFe2O4
(Materials Science Forum, 2006)
In this paper the adsorption and oxidation of CO on nanocrystalline Au/γ-Fe2O3, Au/α-Fe2O3, γ-Fe2O3 and a series of mixed ferrite with Mn xZn1-xFe2O4 composition are investigated. The catalysts were prepared by co-precipitation ...
Segmented thermistors printed by NTC nanometric paste and applied in volume air-flow sensors
(Materials Science Forum, 2006)
An investigation path starting from (Mn,Ni,Co,Fe)3O4 nanometric powder preparation, NTC thick-film characterization, realization and optimization of new planar thermistor geometries to custom design thermistors and their ...
Nanoscale topography of GC/Pt-C and GC/Pt-Ru-C electrodes studied by means of STM, AFM and XRD methods
(Materials Science Forum, 2006)
Electrodes, assigned as GC/Pt-C and GC/Pt-Ru-C, were formed by deposition of Pt-based catalysts (47.5 wt % Pt + high surface area carbon) and (54 wt. % Pt-Ru alloy + high surface area carbon) on glassy carbon (GC) discs. ...
Hydrogenation of soybean oil over Ag-Ni/diatomite catalysts. Effect of silver content on the cis/trans isomerization selectivity
(Materials Science Forum, 2006)
Silver promoted nickel catalysts supported on diatomite were prepared by precipitation method. Characterization of the catalysts prepared with different silver contents (0.1-4.0 wt%) included AAS, XRD, Hg porosimetry, BET ...