Pretraživanje
Prikaz rezultata 71-80 od 81
The effect of preparation of aluminum surface on the structure of final coating of nickel / Uticaj pripreme površine aluminijuma na strukturu završne prevlake nikla
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work structure characteristics of the final coating of nickel were studied. Nickel was deposited onto chemically prepared aluminum, chemically and electrochemically. Structural characteristics of metallic coatings ...
Morphology of Fe-Ni alloy powders electrodeposited from citrate-sulfate containing solutions / Morfologija prahova Fe-Ni legura elektrohemijski istaloženih iz citratno-sulfatnih rastvora
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
The electrochemical deposition of the Fe-Ni alloy powders from citrate-sulfate containing electrolytes of different Ni/Fe ions concentration ratios at pH 4.5 was examined by the polarization measurements. All polarization ...
Properties of Ni-W alloys electrochemically deposited by direct and pulse current / Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters ...
Formation and growth of pits on X5CrNi18-10 austenitic stainless steel in presence of chlorides and sulphates / Formiranje i rast pitova na austenitnom nerđajućem čeliku X5CrNi18-10 u prisustvu hlorida i sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The resistance of X5CrNi18-10 stainless steel to pitting corrosion in a solution containing chlorides and sulphates was tested using the potentiodynamic polarization method. The obtained results show that the stainless ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites / Uticaj morfologije punioca na termijske karakteristike kompozita lignoceluloze punjene metalnim prahovima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic matrix (LC) filled with electrolytic copper powder and chemically obtained silver powder are presented. ...
Magnetic behaviour of hybrid magnetic composite materials / Magnetno ponašanje hibridnih magnetnih kompozitnih materijala
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
Polymer bonded magnets are contemporary materials with a very large range of applications. The objective of this study is to assess how different content of Nd-Fe-B and/or barium ferrite particles affect on magnetic and ...
Polymer bonded magnetic composites based on Nd-Fe-B / Polimerni magnetni kompoziti na bazi Nd-Fe-B
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Various types and contents of magnetic powder and polymer matrix induce different mechanical, magnetic, electrical and optical properties of final composite material. The strong influence of relatively small amounts of ...
Tensile strength properties of hybrid magnetic composite materials / Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while ...
The editing - Zaštita materijala
(Beograd, Srbija : Inženjersko društvo za koroziju, 2023)