Претраживање
Приказ резултата 31-40 од 48
Impedance characteristics of aluminum with sol-gel ceria protective coating during the exposure to chloride corrosion agent / Impedansni odgovor aluminijuma sa zaštitnom prevlakom oksida cerijuma tokom izlaganja hloridnoj korozionoj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Electrochemical impedance characteristics of bare Al and Al with CeO2 coating prepared sol-gel procedure from the ceria sol are investigated. The corrosion behavior is monitored during the exposure to 3 wt. % NaCl aqueous ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Catalytic effect of sulphuric acid in the process of deposition of chromium coatings / Katalitički uticaj sumporne kiseline u procesu taloženja prevlaka hroma
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
This paper analyzes the catalytic effect of sulphuric acid on current efficiency, the coating thickness and the rate of deposition of electrochemical chromium coatings. According to the properties of chrome, there are three ...
Chemical investigation of miscanthus × giganteus Greef et Deu. Cultivated in Serbia: A potential renewable source of energy / Hemijska ispitivanja miskantusa gajenog u Srbiji - potencijalni obnovljiv izvor energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
According to scientific community and professional specialists, urging necessity to increase capacity of sources of energy can be partially achieved by using biomass as a raw material. This approach is justified by both ...
Influence of welding current intensity on pitting corrosion resistance in welded joint of stainless steel X5CrNi18-10 / Uticaj jačine struje zavarivanja na otpornost prema piting koroziji zavarenog spoja nerđajućeg čelika X5CrNi18-10
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The effect of welding current on the pitting corrosion resistance in the welded joint of austenitic stainless steel X5CrNi18-10 was tested. Welding was carried out using three different current intensity (110 A, 130 A and ...
Correlation between crystal orientation and morphology of electrolytically produced powder particles: Analysis of the limiting cases / Korelacija izmedju orijentacije kristala i morfologije elektrolitički proizvedenih praškastih čestica - analiza graničnih slučajeva
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Lead and nickel powder particles were produced by the processes of electrolysis and characterized by scanning electron microscope (SEM). The X-ray diffraction (XRD) analysis of the produced particles was done. Morphologies ...
Formation and growth of pits on X5CrNi18-10 austenitic stainless steel in presence of chlorides and sulphates / Formiranje i rast pitova na austenitnom nerđajućem čeliku X5CrNi18-10 u prisustvu hlorida i sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The resistance of X5CrNi18-10 stainless steel to pitting corrosion in a solution containing chlorides and sulphates was tested using the potentiodynamic polarization method. The obtained results show that the stainless ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Polymer bonded magnetic composites based on Nd-Fe-B / Polimerni magnetni kompoziti na bazi Nd-Fe-B
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Various types and contents of magnetic powder and polymer matrix induce different mechanical, magnetic, electrical and optical properties of final composite material. The strong influence of relatively small amounts of ...