Претраживање
Приказ резултата 21-30 од 49
Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime
(Elsevier, 2011)
In this study, the effect of the anodic current density in the regime of reversing current (RC) on the quantity of evolved hydrogen and morphology of copper deposits was considered. The quantity of evolved hydrogen was ...
Protective properties of cataphoretic epoxy coating on aluminium alloy AA6060 modified with electrodeposited Ce-based coatings: Effect of post-treatment
(Elsevier Science Sa, Lausanne, 2015)
Ce-based conversion coatings (CeCCs) are a promising alternative to toxic chromate coatings on the metal substrates. In this work the CeCCs were electrodeposited on aluminium alloy AA6060 from aqueous solution of Ce(NO3)(3) ...
Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range
(Springer, New York, 2012)
The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
Electrochemical deposition and characterization of Zn /Co alloys and corrosion protection by electrodeposited epoxy coating on Zn /Co alloy
(Elsevier, 2002)
Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure ...
Fundamental aspects of plating technology II: Morphological aspects of metal electrodeposition from complex salt solutions
(Elsevier, 1983)
It is shown that the improved quality of electrodeposits obtained from ammonium complex salt solutions compared with deposits obtained from simple salt solutions is due to the decrease in the exchange current density value ...
Electrodeposition of Ni, Co and Ni–Co alloy powders
(Elsevier, 2006)
In this paper the polarization characteristics of the processes of Ni and Co powders and Ni-Co alloy powders electrodeposition from ammonium sulfate containing supporting electrolyte are investigated as a function of Ni ...
Nanoscale pattern formation during electrodeposition: Ru on reconstructed au(111)
(USA : American Physical Society, 1999)
Scanning tunneling microscopy results on Ru electrodeposition on reconstructed Au(111) are presented, which show a novel type of site-selective nucleation on this surface. At potentials around 0.0 V vs the Ag/AgCl reference ...
Fundamental aspects of pulsating current metal electrodeposition IX: The prevention of spongy deposit formation on inert substrates
(Elsevier, 1984)
It is shown that spongy deposits are obtained under d.c. conditions and that compact deposits are obtained in pulsating current (PC) deposition with high pause-to-pulse ratios at the same average current density and ...
Electrodeposited Pd and PdNi coatings as electrodes for the electrochemical oxidation of ethanol in alkaline media
(Springer, New York, 2017)
Electrodeposition of Pd and PdNi coating samples of different thicknesses, depending on the coating composition and current efficiency, was achieved galvanostatically on the rotating Au disc electrode from the plating bath ...