Претраживање
Приказ резултата 11-20 од 32
Electrochemical deposition of powder alloy Co-Ni-Mo-O / Elektrohemijsko dobijanje prahova legure Co-Ni-Mo-O
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
The electro deposition of the Co-Ni-Mo-O alloy powders from alkaline ammonium electrolytes and at constant current density was investigated. Metals of iron group, Co and Ni induce deposition of Mo, which alone can not be ...
Corrosion causes in thermal power plants and ways of prevention / Uzroci korozije u termoenergetskim postrojenjima i načini prevencije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Corrosion damages often exert considerable influence on outages number and hence on the loss of thermal power plant availability. In order to accomplish the aim of reducing the corrosion to it's minimum and prevent main ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
New method of the determination of specific surface of copper obtained by the electrodeposition / Novi metod određivanja specifične površine elektrohemijski istaloženog bakra
(Belgrade, Serbia : Engineering Society for Corrosion, 2007)
The specific surface of electrodeposited copper was determined using recently proposed way for the estimation of the real surface area of metal deposits. The obtained values of the specific surface of copper deposits were ...
Electrochemically deposed Ni/W composite coatings obtained under constant and pulsating current regimes / Kompozitne Ni/WC prevlake dobijene elektrohemijskim taloženjem konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
The properties of composite coatings are dependent on properties of the base metal, as well as on properties of incorporating particles. The Ni / W composite coatings were obtained by electro deposition from commercially ...
The roughness analysis of metal coatings by STM technique part III: Analysis of copper coatings electrodeposited with thiourea as brightening additive / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije III deo - analiza prevlaka bakra istaloženih sa tioureom kao aditivom za sjaj
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodeposited from a sulfate bath in the presence of thiourea, by methodology which is described in part I of this work. It was shown that the ...
The roughness analysis of metal coatings by STM technique part IV: The relation between brightness and mechanisms of metal electrodeposition / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije IV deo - veza između sjaja i mehanizma elektrohemijskog taloženja metala
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work is given the analysis of roughness of copper coatings electrodepositedfrom a sulfate bath in the presence of modified polyglycol ether (Lutron H F 1), PEG 6000 and 3 - mercapto alkane sulfonate, by methodology ...
Magneto electrochemistry: Basic facts and the effects of the applied magnetic fields onto corrosion of metals, mass transfers, kinetic of process and the preferred orientation of deposits / Magneto-elektrohemija - osnovne činjenice i uticaji primenjenog magnetnog polja na koroziju metala, prenos mase, kinetiku procesa i preferencijalnu orijentaciju taloga
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, the theoretical survey of the basic facts about magneto electrochemistry will be given. It will be analyzed the effects of the applied magnetic fields on kinetic of the electrochemical processes, mass transfer ...
The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum / Uticaj fluorida i pH vrednosti elektrolita na strukturu prevlaka bakra istaloženih na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The copper coatings were electrodeposited directly onto aluminum from the following solution: CuSO4-⋅5H2O (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) (NH4)2SO4 (30 g/dm3) + Na2SO4 - 10H2O (75 g/dm3) + Na2CO3 (3g/dm3), room ...
The morphology of copper powder obtained by different regimes of electrolysis / Morfologija bakarnog praha dobijenog različitim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder were investigated using a ...