Претраживање
Приказ резултата 11-20 од 32
Activated titanium anodes in cathodic protection: A comparison of the characteristics of anodes prepared by sol-gel procedure and thermal decomposition / Aktivirane titanske anode u katodnoj zaštiti - poređenje karakteristika anoda dobijenih sol-gel postupkom i termičkom razgradnjom
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Polarization characteristics of titanium anodes, coated by active RuO2-TiO2 binary oxide using sol-gel preparation procedure and chloride thermal decomposition, in oxygen evolution reaction during anode electrolytic ...
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Morphology of Ni-Mo-O alloy powders electrodeposited from ammonium sulfate solutions / Morfologija prahova Ni-Mo-O legura istaloženih elektrohemijskim postupkom iz rastvora amonijum sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
The electro deposition of the Ni-Mo-O alloy powders from ammonium sulfate containing electrolytes of different Ni/Mo ions concentration ratios was investigated by the polarization measurements. In all electrolytes similar ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
Electrochemical deposition of powder alloy Co-Ni-Mo-O / Elektrohemijsko dobijanje prahova legure Co-Ni-Mo-O
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
The electro deposition of the Co-Ni-Mo-O alloy powders from alkaline ammonium electrolytes and at constant current density was investigated. Metals of iron group, Co and Ni induce deposition of Mo, which alone can not be ...
Kinetic of corrosion reactions in acid and neutral solutions on electrochemically deposited Ni-W alloys / Kinetika korozionih reakcija u kiselim i neutralnim rastvorima na elektrohemijski taloženim legurama Ni-W
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
Ni-W alloys were electrochemically deposited from an ammonia-citrate electrolyte on rotating disc electrode with a gold disc, by direct and pulsating current. The corrosion potential and kinetics of cathodic and anodic ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Influence of the structure of metallic chromium on its electrochemical and chemical corrosion / Uticaj strukture metalnog hroma na njegovu elektrohemijsku i hemijsku koroziju
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
It was shown that metallic chromium in aqueous solution of sulfuric acid dissolves in accord with the electrochemical mechanism proposed by Wagner and Traud, but also by a direct chemical reaction of metal with water ...
The morphology of copper powder obtained by different regimes of electrolysis / Morfologija bakarnog praha dobijenog različitim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder were investigated using a ...