Претраживање
Приказ резултата 1-10 од 17
Morphological and Structural Characterization of Tin Dendritic Nanostructures Produced by Various Electrodeposition Processes
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
In this study, Sn powders were electrodeposited from an alkaline electrolyte containing 20 g/l SnCl2 × 2H2O in 250 g/l NaOH at the room temperature by application of both potentiostatic and
galvanostatic regimes of the ...
Optimization of electrodeposition parameters to improve composite hardness of nickel coatings on brass substrate for varying film thicknesses and applied indentation loads
(Belgrade : ETRAN Society, 2022)
In this investigation, nickel coatings were electrodeposited on brass substrate. The effects of
electrodeposition process parameters such as, current density and deposition time (coatings thickness), on surface morphology ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
Morphology of aluminium electrodeposited on aluminium from AlCl3+urea solvate ionic liquid
(Society of Physical Chemists of Serbia, 2021)
The ionic liquid, made of urea and AlCl3, known as deep eutectic solvent (DESs) has already shown to be low‐cost electrolyte suitable for aluminum electrodeposition. By applying appropriate potentiostatic or galvanostatic ...
Influence of parameters of the pulsating current (PC) regime on morphological, structural and hardness characteristics of copper coatings electrodeposited on Si(111)
(Niš, Serbia : RAD Centre, 2021)
Electrodeposition of Cu was performed on Si(111) by the pulsating current (PC) regime in the
range of the average current densities (jav) between 15 and 70 mA cm-2
. The selected values of the
average current densities ...
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Electrodeposition of Aluminium-Vanadium Alloys from Chloroaluminate Based Molten Salt Containing Vanadium Ions
(MDPI, 2021)
The Al-V alloys were synthetized by potentiostatic electrodeposition onto a glassy carbon electrode from equimolar AlCl3 + NaCl bath containing vanadium ions at 200 °C. The alloy deposits were characterized by X-ray ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot-Lesage composite hardness model / Одређивање апсолутне тврдоће електролитички добијених превлака бакра применом Chicot-Lesage композитног модела тврдоће
(Belgrade : Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot–Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Roughness of Cu coatings
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear angineering, 2020)
Copper coatings are produced on silicon wafer by electrodeposition (ED) in pulsating current (PC) regime. Electrodeposition was performed at various current density amplitudes in the range of 80−140 mA cm-2, frequency in ...