Pretraživanje
Prikaz rezultata 1-10 od 77
The influence of chemical composition on microstructure, hardness and electrical conductivity of Ag-Bi-In alloys at 100 degrees C
(Serbia : Association of Metallurgical Engineers of Serbia AMES, 2017)
Considering possible applications and scarceness of literature data, Ag-Bi-In system was investigated in terms of microstructure, mechanical and electrical properties of ternary alloys from an isothermal section at 100 °C. ...
Field applicable methods for intergranular corrosion testing of stainless steels structures / Metode ispitivanja interkristalne korozije na konstrukcijama od nerđajućh čelika na terenu
(Society for Structural Integrity and Life, 2016)
Determination of the susceptibility of austenitic stainless steel X5CrNi18-10 to intergranular corrosion (IGC) is performed by measuring the corrosion potential Ecorr in a drop of a test solution with specific chemical ...
Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2016)
Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was ...
Methods of decreasing losses in optical metamaterials
(Niš, Srbija : Univerzitet u Nišu, 2018)
In this work we review methods to decrease the optical absorption losses in metamaterials. The practical interest for metamaterials is huge, but the possible applications are severely limited by their high inherent optical ...
Mechanical and electrical properties of ternary Ag-Bi-Ga system at 250 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
This paper presents a comparative review of the experimental and thermodynamic assessment of a ternary Ag-Bi-Ga system. An isothermal section at 250 °C was calculated using optimized thermodynamic data for the constitutive ...
Investigation of phenol adsorption on macroporous polymeric adsorbents / Ispitivanje adsorpcije fenola na makroporoznim polimernim adsorbensima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
This work reports results on phenol adsorption from aqueous solution by porous copolymers based on glycidyl methacrylate: two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Temperature measurement performance of silicon piezoresistive MEMS pressure sensors for industrial applications
(Univerzitet u Nišu, 2015)
Temperature and pressure are the most common parameters to be measured and monitored not only in industrial processes but in many other fields from vehicles and healthcare to household appliances. Silicon microelectromechanical ...
Technological investigations of sulphide oxidation from flotation tailings in order to increase the degree of copper leaching
(Institut za rudarstvo i metalurgiju Bor, 2014)
The off-balance resources present the environmental problem and potential resource for copper extraction. This paper presents the results obtained using different reagents for the process of sulphide form oxidation of ...
Chemical corrosion of metals and alloys / Hemijska korozija metala i legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this paper, phenomena of chemical corrosion of metals and alloys in electrolyte solutions are analyzed. It is shown that iron, chromium and other metals and alloys dissolve much faster than is the corrosion rate determined ...