Претраживање
Приказ резултата 1-10 од 10
Properties of Ni-W alloys electrochemically deposited by direct and pulse current / Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters ...
Morphology of Fe-Ni alloy powders electrodeposited from citrate-sulfate containing solutions / Morfologija prahova Fe-Ni legura elektrohemijski istaloženih iz citratno-sulfatnih rastvora
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
The electrochemical deposition of the Fe-Ni alloy powders from citrate-sulfate containing electrolytes of different Ni/Fe ions concentration ratios at pH 4.5 was examined by the polarization measurements. All polarization ...
Uticaj gustine struje na morfologiju elektrohemijski dobijenog bakarnog praha / Influence current density on the morphology electrochemical obtained copper powder
(Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2014)
U radu je ispitivan uticaj gustine struje na morfologiju elektrohemijski dobijenog bakarnog praha.
Vršeno elektrohemijsko taloženje bakarnog praha iz sulfatnih elektrolita. Korišćeni su elektroliti sa tri koncentracije ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Investigation of the morphology and surface properties of crosslinked poly(urethane-ester-siloxane)s / Ispitivanje morfologije i površinskih svojstava umreženih poli(uretan-estar-siloksana)
(Association of Chemical Engineers of Serbia, 2012)
Two series of crosslinked poly(urethane-ester-siloxane)s were synthesized from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS- -EO), 4,4'-methylenediphenyl diisocyanate and Boltorn® hyperbranched ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Study on the morphology and thermomechanical properties of poly(urethane-siloxane) networks based on hyperbranched polyester / Proučavanje morfologije i termomehaničkih svojstava umreženih poli(uretan-siloksana) na bazi hiperrazgranatog poliestra
(Association of Chemical Engineers of Serbia, 2013)
Two series of polyurethane films based on hyperbranched polyester of the second pseudo-generation (Boltorn®), 4,4'-methylenediphenyl diisocyanate and two different siloxane prepolymers, α,ω-dihydroxy-(ethylene oxide-poly ...
Influence of regime of electrolysis on morphology and structure of copper dendrites / Uticaj režima elektrolize na morfologiju i strukturu dendrita bakra
(Belgrade : Serbian Society of Corrosion and Materials Protection UISKOZAM, 2021)
Comparative analysis of morphological and structural features of copper dendrites obtained by potentiostatic and galvanostatic regimes of electrolysis was made. The 3D (three dimensional) pine-like dendrites composed from ...