Pretraživanje
Prikaz rezultata 1-10 od 28
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(MDPI, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was
the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co
coatings obtained under the same ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
Electrochemical investigation of lateritic ore leachates for metal ions extraction
(Belgrade : Serbian Society of Corrosion and Materials Protection UISKOZAM, 2021)
Electrochemical measurements were employed to study the possibility of the extraction of metal ions from lateritic ore leachates predominantly rich in Fe in order to separate more noble cobalt and nickel metals. Lateritic ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Influence of electrodeposition regime and Sn:Pd ratios in Sn-Pd electrocatalysts on ethanol oxidation reaction / Влијание на режимот на електродепозицијата и на односите на Sn:Pd во Sn-Pd-електрокатализаторите врз оксидацијата на етанолот
(Society of Chemists and Technologists of MacedoniaSs. Cyril and Methodius University in Skopje, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Analysis and interpretation of bimetallic plasmonic metamaterial properties for forensic applications
(Belgrade : University of Criminal Investigation and Police Studies, 2023)
Plasmonic biochemical sensors, as a subgroup of optical refractometric sensors, are a topic of rapid research and development due to their ability to detect trace amounts of biochemical agents, ...
Optimization of electrodeposition parameters to improve composite hardness of nickel coatings on brass substrate for varying film thicknesses and applied indentation loads
(Belgrade : ETRAN Society, 2022)
In this investigation, nickel coatings were electrodeposited on brass substrate. The effects of
electrodeposition process parameters such as, current density and deposition time (coatings thickness), on surface morphology ...
Morphological and Structural Characterization of Tin Dendritic Nanostructures Produced by Various Electrodeposition Processes
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
In this study, Sn powders were electrodeposited from an alkaline electrolyte containing 20 g/l SnCl2 × 2H2O in 250 g/l NaOH at the room temperature by application of both potentiostatic and
galvanostatic regimes of the ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...