Претраживање
Приказ резултата 1-10 од 15
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
The Effect of Periodically Changing Regimes on the Electrodeposition of Silver Powder
(Esg, Belgrade, 2011)
The effect of different deposition regimes (constant and reversing currents, constant and pulsating overpotential), on the powdered and dendritic silver electrodeposits morphology were investigated. The morphology of ...
The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential
(Elsevier, 2006)
The effect of hydrogen codeposition on the morphology of copper electrodeposits was studied. The dependences of the overall current and the volume of evolved hydrogen on the quantity of electricity used were plotted and ...
Influence of Parameters and Regimes of the Electrodeposition on Morphology and Structure of Tin Dendrites / Uticaj parametra i režima elektrohemijskog taloženja na morfologiju i strukturu dendrita kalaja
(Beograd : Serbian Society of Corrosion and Materials Protection UISKOZAM / Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2022)
Tin dendrites were synthesized via electrochemical route from the alkaline electrolyte applying both
potentiostatic and galvanostatic regimes of the electrodeposition. Various both cathodic potentials
and amounts of ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Influence of Parameters and Regimes of the Electrodeposition on Hardness of Copper Coatings
(MDPI, 2023)
Correlation among morphological, structural and hardness characteristics of electrodeposited
copper coatings is presented in this review paper. Cu coatings were produced applying constant galvanostatic (DC) and pulsating ...
Characterization of electrodeposited powders of the system Ni-Mo-O
(Oxford : Pergamon-Elsevier Science Ltd, 2008)
The electrodeposition of the Ni-Mo-O alloy powders from ammonium chloride containing electrolytes for different Ni/Mo ions concentration ratios was investigated by the polarization measurements. The morphology, chemical ...
Nucleation and early stages of growth of lead onto copper electrodes from dilute electrolytes
(Elsevier, 2016)
The processes of nucleation and growth of lead from the dilute electrolytes on copper substrates were investigated by chronoamperometry and by scanning electron microscopic (SEM) analysis of the deposits obtained in the ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...