Претраживање
Приказ резултата 1-10 од 10
A Novel Route for Electrolytic Production of Very Branchy Copper Dendrites under Extreme Conditions
(IOP Publishing Limited, 2021)
Copper electrodeposition in a form of powder was examined using the pulsating overpotential (PO) regime from the sulfate electrolyte without or with an addition of various concentrations of chloride ions. Morphological and ...
Nanoscale pattern formation during electrodeposition: Ru on reconstructed au(111)
(USA : American Physical Society, 1999)
Scanning tunneling microscopy results on Ru electrodeposition on reconstructed Au(111) are presented, which show a novel type of site-selective nucleation on this surface. At potentials around 0.0 V vs the Ag/AgCl reference ...
Determination of critical conditions for the formation of electrodeposited copper structures suitable for electrodes in electrochemical devices
(MDPI, 2007)
Electrodeposition of copper from acid sulfate solutions at overpotentials on the plateau of the limiting diffusion current density and at higher overpotentials was examined. The average current efficiencies for hydrogen ...
Copper-Nickel heterometallic multilayer composites for plasmonic applications
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Plasmonics and optical metamaterials offer possibilities for numerous applications in different fields, from transformation optics and chemical sensing to merging the beneficial properties of electronic and optical circuits. ...
Synergetic effect of additives on the hardness and adhesion of thin electrodeposited copper films
(Faculty of Technical Sciences in Cacak, 2017)
Thin copper films were electrodeposited on a polycrystalline cold-rolled copper substrate. The composition of the laboratory-made copper sulphate electrolyte was changed by the addition of various additives. The influence ...
Effect of parameters of pulsating current (PC) regimes on morphology of electrodeposited copper in hydrogen co-deposition range
(Serbian Chemical Society, Belgrade, 2010)
The most often employed electrolytes for the electrodeposition of copper are those based on aqueous solutions of sulfuric acid (H2SO4) and cupric sulfate (CuSO4). There is an ionic equilibrium of a lot of species in the ...
Electrochemical Activity of Thin-Film Pd Catalysts Modified with Bi for Methanol and Ethanol Oxidation Reaction in Alkaline Solution
(ESG, 2020)
Thin-film Pd catalysts with low metal loadings (55 and 110 µg cm-2) were obtained by electrodeposition from a surfactant-free green electrolyte on glassy carbon (GC) electrode. Pd/GC catalysts were modified by addition of ...
Structural, Mechanical and Electrical Characteristics of Copper Coatings Obtained by Various Electrodeposition Processes
(MDPI, 2022)
Mechanical (hardness and adhesion) and electrical (sheet resistance) characteristics of electrolytically produced copper coatings have been investigated. Morphologies of Cu coatings produced galvanostatically at two current ...
Electrochemical Investigation of Lateritic Ore Leaching Solutions for Ni and Co Ions Extraction
(Switzerland : Multidisciplinary Digital Publishing Institute (MDPI), 2022)
Determination of the extractive behavior of ionic species from lateritic ore leachates is complex, since the leachates are pregnant with tens of different ions in, as a rule, multiple oxide states. To examine the possible ...
Electrodeposition of iron powder particles of different characteristics
(Serbian Chemical Society, Belgrade, 2010)
Iron deposits obtained at high current densities and overpotentials are very important from a technological point of view. It has been stated that the open and porous structures of copper or iron deposits obtained at high ...