Претраживање
Приказ резултата 1-10 од 19
Mixed RuO2/TiO2 uniform microspheres synthesized by low-temperature ultrasonic spray pyrolysis and their advanced electrochemical performances
(Elsevier, 2019)
Uniformly-shaped, spherical RuO2/TiO2 particles were synthesized exclusively by one-step ultrasonic spray pyrolysis USP) of a mixture of n-butylorthotitanate and ruthenium chloride acidic aqueous solutions. The USP temperature ...
Preparation and photocatalyic properties of TiO2-P25 film prepared by spray pyrolysis method
(Elsevier, 2013)
TiO2 films were synthesized by immobilization of Degussa P25 powders on stainless steel support by spray pyrolysis technique. After preparation, the films were annealed at different temperatures in order to obtain materials ...
The effect of deposition temperature on the surface coverage and morphology of iron-phosphate coatings on low carbon steel
(Elsevier, 2011)
The influence of deposition temperature and concentration of NaNO(2) in the phosphating bath on the surface morphology and coverage of iron-phosphate coatings on low carbon steel was investigated. The phosphate coatings ...
Low-friction, wear-resistant, and electrically homogeneous multilayer graphene grown by chemical vapor deposition on molybdenum
(Elsevier, 2020)
Chemical vapour deposition (CVD) is a promising method for producing large-scale graphene (Gr). Nevertheless, microscopic inhomogeneity of Gr grown on traditional metal substrates such as copper or nickel results in a ...
Activation of Oxone® with plasma deposited mixed cobalt and alumina oxide for the dye degradation
(Elsevier, 2020)
The aim of this work is to examine the possibility of the formation of cobalt doped Al2O3 coatings on aluminum substrate by plasma electrolytic oxidation process (PEO) and application of the obtained material as catalyst ...
Characterization of lead sorption by the natural and Fe(III)-modified zeolite
(Elsevier, 2013)
The influence of contact time, temperature and particle size on lead sorption by the natural and Fe(III)-modified zeolites was investigated. Characterization of the natural and Fe(III)-modified zeolite before and after ...
Chemical surface composition of the polyethylene implanted by Ag+ ions studied by phase imaging atomic force microscopy
(Elsevier, 2010)
High density polyethylene (HDPE) has been modified by Ag+ ion implantation with the energy of 60 keV. The total amount of implanted silver ions was 1, 5 and 12 x 10(15) ions/cm(2). The surface topography was observed by ...
Structural, photoluminescent and photocatalytic properties of TiO2:Eu3+ coatings formed by plasma electrolytic oxidation
(Elsevier, 2016)
In this paper, we used plasma electrolytic oxidation (PEO) of titanium in water solution containing 10 g/L Na3PO4 center dot 12H(2)O + 2 g/L Eu2O3 powder for preparation of TiO2:Eu3+ coatings. The surfaces of obtained ...
Quantification of the lift height for magnetic force microscopy using 3D surface parameters
(Elsevier, 2010)
In this work, the quantitative conditions for the lift height for imaging of the magnetic field using magnetic force microscopy (MFM) were optimized. A thin cobalt film deposited on a monocrystalline silicon (1 0 0) substrate ...
Electrochemical behavior of immobilized hemoglobin in alkaline solution
(Elsevier, 2017)
Glassy carbon electrode was modified with different synthesized hybrid clay-based materials and tested in alkaline solution with and without H2O2. The hybrid materials were obtained by immobilizing hemoglobin (Hb) on acid ...