Search
Now showing items 1-10 of 23
Corrosion causes in thermal power plants and ways of prevention / Uzroci korozije u termoenergetskim postrojenjima i načini prevencije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Corrosion damages often exert considerable influence on outages number and hence on the loss of thermal power plant availability. In order to accomplish the aim of reducing the corrosion to it's minimum and prevent main ...
Characterization and corrosion properties of electrodeposited Ni-W alloys / Karakterizacija i korozione karakteristike elektrohemijski taložene legure Ni-W
(Serbian Chemical Society, 2001)
Ni-W alloys electrodeposited from citrate solution consist of three different phases, which are all present in high W-content alloys: a solid solution of W in a Ni matrix; an intermetallic compound Ni4W, as well as another ...
Structural effects of metallic chromium on its electrochemical behavior / Uticaj strukture metalnog hroma na njegovo elektrohemijsko ponašanje
(Serbian Chemical Society, 2007)
Chromium dissolution in aqueous sulfuric acid solution of pH 1 was studied electrochemically on chromium electrodes with different crystallographic structures. A slow potentiodynamic method was used for the electrochemical ...
Sage Extracts as Inhibitors of Steel Corrosion in 4% HCl
(Esg, Belgrade, 2016)
In this paper the research of corrosion protection of steel by processing corrosion environment using various concentrations of sage extracts (Salvia officinalis) (0.5 g/dm(3), 1 g/dm(3) and 1.5 g/dm(3)) in a 4% solution ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Magneto electrochemistry: Basic facts and the effects of the applied magnetic fields onto corrosion of metals, mass transfers, kinetic of process and the preferred orientation of deposits / Magneto-elektrohemija - osnovne činjenice i uticaji primenjenog magnetnog polja na koroziju metala, prenos mase, kinetiku procesa i preferencijalnu orijentaciju taloga
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, the theoretical survey of the basic facts about magneto electrochemistry will be given. It will be analyzed the effects of the applied magnetic fields on kinetic of the electrochemical processes, mass transfer ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(MDPI, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was
the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co
coatings obtained under the same ...
Economizer water-wall damages initiated by feedwater impurities
(Association of Chemical Engineers of Serbia, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Chemical corrosion of metals and alloys / Hemijska korozija metala i legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this paper, phenomena of chemical corrosion of metals and alloys in electrolyte solutions are analyzed. It is shown that iron, chromium and other metals and alloys dissolve much faster than is the corrosion rate determined ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...