Search
Now showing items 11-20 of 81
Molecular descriptors as proxies for the modeling of the materials and their environmental impact / Računarski generisani molekulski deskriptori kao proxi-ji za modelovanje materijala i njihovog uticaja
(Belgrade : Engineering Society for Corrosion, 2016)
For the prediction of material's properties and of interaction of molecules with the surroundings, one needs to know their properties. Usually, the molecular properties are revealed through experimental measurements. It ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Magneto electrochemistry: Basic facts and the effects of the applied magnetic fields onto corrosion of metals, mass transfers, kinetic of process and the preferred orientation of deposits / Magneto-elektrohemija - osnovne činjenice i uticaji primenjenog magnetnog polja na koroziju metala, prenos mase, kinetiku procesa i preferencijalnu orijentaciju taloga
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, the theoretical survey of the basic facts about magneto electrochemistry will be given. It will be analyzed the effects of the applied magnetic fields on kinetic of the electrochemical processes, mass transfer ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
Impedance characteristics of aluminum with sol-gel ceria protective coating during the exposure to chloride corrosion agent / Impedansni odgovor aluminijuma sa zaštitnom prevlakom oksida cerijuma tokom izlaganja hloridnoj korozionoj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Electrochemical impedance characteristics of bare Al and Al with CeO2 coating prepared sol-gel procedure from the ceria sol are investigated. The corrosion behavior is monitored during the exposure to 3 wt. % NaCl aqueous ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...