Претраживање
Приказ резултата 11-20 од 21
Micromechanical properties of composite systems consisting of electrodeposited nickel coatings on different substrates / Mikromehanička svojstva kompozitnih sistema formiranih elektrohemijskim taloženjem filmova nikla i bakra na različitim podlogama
(Savez inženjera i tehničara Srbije, 2012)
Fine-grained nickel and copper thin films were electrodeposited (ED) from self-made sulphamate and sulphate electrolytes, respectively, on different substrates. The substrates were single crystal silicon with two different ...
Properties of adsorbent obtained by conventional and under microwave irradiation / Svojstva adsorbensa dobijenog aktivacijom bentonita na konvencionalan način i u mikrotalasnom polju
(Savez inženjera i tehničara Srbije, 2012)
In this paper the effect of acid activation by conventional and under microwave irradiation on the textural and structural properties of bentonite was studied. The adsorbents were characterized by powder X-ray diffraction ...
Termografija u kontroli efikasnosti i bezbednosti laserskog čišćenja / Thermography in control efficiency and safety of laser cleaning
(Beograd : Savez inženjera i tehničara Srbije, 2019)
Inovativna tehnologija laserskog čišćenja različitih površina u industriji, uključuje integrisani pristup kontrole procesa interakcije laser-materijal i ispitivanja rezultata laserskog delovanja. Lasersko čišćenje ima ...
The importance of remanufacturing in transmitters production / Značaj reproizvodnje u proizvodnji transmitera
(Savez inženjera i tehničara Srbije, 2015)
This paper presents a algorithm for the improvement of the manufacturing process developed and tested for small-scale enterprise. The validity of the algorithm can be seen through: defining basic elements, defining ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Cavitation of refratory samples based on talc and domestic zeolite / Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije
(Srbija : Savez inženjera i tehničara Srbije, 2018)
Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this ...
Effect of tracers molecular weight on the release process from alginate microbeads / Uticaj molekulske mase trejserskih indikatora na kontrolisano otpuštanje iz alginatnih mikročestica
(Savez inženjera i tehničara Srbije, 2015)
The aim of this paper is to obtain microbeads of natural polymers such as alginate and chitosan. These microbeads were used as potential carriers for the active ingredients so that in this study the diffusion of various ...
The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation / Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
(Savez inženjera i tehničara Srbije, 2015)
The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the ...
Security optimization of artefacts laser cleaning / Optimizacija laserskog čišćenja metalnih artifakta
(Savez inženjera i tehničara Srbije, 2017)
Laser techniques have become irreplaceable in solving a wide variety of conservation problems. For the last thirty years, lasers have been used in the diagnostic process, in the process of removing undesirable layers, as ...
Small series production of transmitters in IHTM-CMTM / Maloserijski tip proizvodnje transmitera u IHTM-CMTM-u
(Savez inženjera i tehničara Srbije, 2011)
The paper presents the small series production and model of production. Changes in technology may lead to the development and launch of new products. IHTM as a domestic manufacturer of transmitters had developed and launched ...