Претраживање
Приказ резултата 11-20 од 39
Protective properties of cataphoretic epoxy coating on aluminium alloy AA6060 modified with electrodeposited Ce-based coatings: Effect of post-treatment
(Elsevier Science Sa, Lausanne, 2015)
Ce-based conversion coatings (CeCCs) are a promising alternative to toxic chromate coatings on the metal substrates. In this work the CeCCs were electrodeposited on aluminium alloy AA6060 from aqueous solution of Ce(NO3)(3) ...
Effect of codeposition of polymer on the morphology of electrodeposited copper
(Kluwer Academic Publishers, 1979)
Poly(4-vinyl pyridine-co-methyl methacrylate), which is soluble in water in its protonated form and insoluble as a neutral molecule, has been synthesized and introduced into an acid bath for copper deposition. Potential-sweep ...
The effects of the pause to pulse ratio in the regime of pulsating overpotential on the formation of honeycomb-like structures
(Elsevier Science Inc, New York, 2009)
The formation of honeycomb-like structures in the pulsating overpotential (PO) regime was examined by scanning electron microscopy (SEM). The honeycomb-like structures obtained with a square-wave PO of different pause to ...
Identification of intermetallic compounds in thin layers of electrodeposited Cu–Cd alloys using electrochemical techniques
(USA :Taylor & Francis INC, 1991)
An attempt was made to analyse the phase structure of thin layers of electrodeposited Cu–Cd alloys using anodic linear sweep voltammetry combined with a potentiostatic pulse technique (ALSV–PPT). The results were compared ...
A new insight into the mechanism of lead electrodeposition: Ohmic-diffusion control of the electrodeposition process
(Elsevier, 2013)
A new insight into the mechanism of lead electrodeposition from nitrate solutions is presented by analysis of the polarization characteristics and by scanning electron microscopic (SEM) analysis of the surface morphology ...
Fundamental aspects of pulsating current metal electrodeposition VIII: The effect of pause-to-pulse ratio on microthrowing power of metal deposition
(Elsevier, 1984)
The effect of a pulsating current on the microthrowing power of metal deposits in the early stage of deposition was investigated by scanning electron microscopy. It is shown that at the same average current density the ...
Effect of parameters of square-wave pulsating current on copper electrodeposition in the hydrogen co-deposition range
(Elsevier Science Inc, New York, 2010)
Copper electrodeposition processes in the hydrogen co-deposition range by the pulsating current (PC) regime were examined by the determination of the average current efficiency of hydrogen evolution and by the scanning ...
The Preferred Orientation of Bright Copper Deposits
(Switzerland : Trans Tech Publications Ltd, 2000)
The preferred orientations of copper deposits obtained from acid sulfate solutions were examined. Mat deposits obtained in the absence of the additives and in the presence of disodium 2-naphtol-3,6-disulfonic acid possessed ...
Comparison of open porous copper structures obtained by the different current regimes of electrolysis
(Elsevier, 2012)
Formation of open porous copper structures by the electrodeposition processes in the hydrogen code-position range was considered. Morphologies of copper deposits obtained by the reversing current (RC) regimes at the same ...
Influence of the complex formation on the morphology of lead powder particles produced by the electrodeposition processes
(Elsevier, 2013)
The processes of lead electrodeposition from the basic (nitrate) and complex (acetate) electrolytes were mutually compared by the analysis of their polarization characteristics and by the scanning electron microscopic (SEM) ...