Претраживање
Приказ резултата 11-20 од 21
Supercapacitors based on graphene/pseudocapacitive materials
(Serbian Chemical Society, 2017)
Composites of graphene and SnO2 were successfully prepared by a single step simultaneous synthesis of SnO2 and reduction of graphene oxide (GO). Three different compositions of precursor solution resulted in different ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part III. Influence of Particle Morphology on Appearance of Electrical Conductive Layers
(Esg, Belgrade, 2012)
The electrical conductivity of the system based on lignocellulose (LC) biopolymer matrix filled with electrodeposited copper powder has been studied. Galvanostatically produced copper powder, having highly porous, highly ...
Preparation and characterization of poly(Urethane-siloxane)/titanium-dioxide nanocomposites
(Belgrade : Association of the Chemical Engineers of Serbia, 2019)
This work is focused on preparation of poly(urethane-siloxane)/titanium-dioxide nanocomposites (PUSNs) with enhanced features. PUSNs were prepared by the in situ polymerization reaction using titanium-dioxide as a nano-filler ...
Characterization and Morphology of Copper Powder Particles as a Function of Different Electrolytic Regimes
(Esg, Belgrade, 2010)
The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The results obtained in constant regimes were compared with those obtained in ...
Impact of the poly(propylene oxide)-b-poly(dimethylsiloxane)-b-poly-(propylene oxide) macrodiols on the surface-related properties of polyurethane copolymers
(Assoc Chemical Engineers Serbia, Belgrade, 2016)
Segmented thermoplastic polyurethane copolymers (PURs) were synthesized using 4,4'-methylenediphenyl diisocyanate and 1,4-butanediol as the hard segment and alpha,omega-dihydroxy-poly(propylene oxide)-b-poly(dimethylsilo ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
Morphology of Fe-Ni alloy powders electrodeposited from citrate-sulfate containing solutions / Morfologija prahova Fe-Ni legura elektrohemijski istaloženih iz citratno-sulfatnih rastvora
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
The electrochemical deposition of the Fe-Ni alloy powders from citrate-sulfate containing electrolytes of different Ni/Fe ions concentration ratios at pH 4.5 was examined by the polarization measurements. All polarization ...
Mechanical properties and morphology of the poly(urethane-siloxane) copolymers and their clay nanocomposites
(Serbian Chemical Society, 2018)
In this paper the series of poly(urethane-siloxane) copolymers and their clay nanocomposites were synthesized based on 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the part of the hard segments (HS) and ...
Hybrid macroporous polymer/clay nanocomposites
(Belgrade, Serbia : Serbian Ceramic Society, 2017)
Hybrid polymer/nanocomposites are a new class of materials that consist of polymer
matrix and clay nanoparticles as the dispersed phase. The aim of this work was to obtain
macroporous poly(glycidyl methacrylate-co-ethylene ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...