Претраживање
Приказ резултата 31-40 од 102
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Belgrade : Engineering Society for Corrosion, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and
their use in alkyd based coatings to improve anticorrosive properties is presented in this work.
Two methods of tannin ...
The resistance to general corrosion of series of zinc-aluminum alloys modified with silicon and strontiumloys modified with silicon and strontium / Otpornost na opštu koroziju serije legura cink-aluminijum koje su modifikovane silicijumom i stroncijumom
(Belgrade : Engineering Society for Corrosion, 2019)
The resistance to corrosion of the series of zinc-aluminum casting alloys modified with silicon and
strontium was studied in a sodium chloride solution. It was shown that general corrosion was the
main form of corrosion ...
Corrosion testing of sa 387 gr. 91 steel
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Corrosion behaviour of steel Sa 387 Gr. 91 is tested in solutions containing chloride and sulphate anions. These solutions simulate the conditions of marine and industrial atmosphere. The tests are carried out in a slightly ...
Lipid composition and DPPH activities of the seed oil of five TurkiLipid composition and DPPH activities of the seed oil of five Turkish hazelnut genotypes (Corylus colurna L.)sh hazelnut genotypes (Corylus colurna L.)
(Belgrade : Institute for Medicinal Plant Research 'Dr Josif Pančić', 2019)
Five genotypes of Turkish hazelnuts (Corylus colurna L.) were analyzed for chemical composition,
including total oil content, fatty acid and sterol composition. The oil yields from these kernels
varied from 36.5% to 60.8% ...
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2016)
Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was ...
Occurence of Botryococcus terribilis Komárek & Marvan in the small sand pit lake – first report from Serbia
(Novi sad : Matica Srpska, 2021)
Alkaline saline ponds and lakes are habitats with unique biodiversity. The green alga of the genus Botryococcus was accidentally discovered during a micro-algal survey of these habitats in Serbia. Species B. terribilis was ...
Field applicable methods for intergranular corrosion testing of stainless steels structures / Metode ispitivanja interkristalne korozije na konstrukcijama od nerđajućh čelika na terenu
(Society for Structural Integrity and Life, 2016)
Determination of the susceptibility of austenitic stainless steel X5CrNi18-10 to intergranular corrosion (IGC) is performed by measuring the corrosion potential Ecorr in a drop of a test solution with specific chemical ...